Operation Manual

Fagor washing machi-
nes also allow you to
change the direction in
which the door opens.
a Loosen the screws
of the hinges and
dismantle the door
of the washing
machine.
b Remove the lower
protection frame,
loosening the
screws. .
c Extract the panel
that was supplied
with the washing
machine and the
internal panel, loo-
sening the screws
that hold it together.
d Extract the hinges
and insert them on
the other side of the
door.
e Loosen the protecti-
ve cover on the
door and place it
on the opposite
side where the hin-
ges were.
f Replace the plate
again, the door
panel and the lower
protection frame.
Then hang the door
again.
g Extract the fastener
situated at the front
of the washing
machine unit, by loo-
sening the corres-
ponding screw. Now
place the fastener in
the spot where the
upper hinge used to
be
h Remove the protec-
tive buffer and
place it in the spot
where the lower
hinge used to be.
a
b
h i
c d
e
f g
e
i Hang the door by
lightly pushing and
inserting the hinges
in their new location.
Adjust the screws.