Operation Manual

-17-
UK - 16 -
• The appliance is not intended for use by people (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that
they don’t play with the appliance.
• If the supply cord is damaged it must be replaced by the manufacturer or service
agent or appointed person.
Switching On the Appliance
• If the power supply cord is damaged, in order to avoid hazard it
must be replaced by the service or by qualified personnel.
• Before switching on, place the appliance on upright position
and wait at least three hours without moving the appliance. This
will give the refrigerant circuit time to settle and operate
efficiently.
• Clean the appliance thoroughly, especially in the interior, before
use (See Cleaning and Maintenance).
• Installation of the appliance and electrical connections must be
carried out by a qualified technician, in accordance with the
Installation Manual and local regulati
ons.
• Installation procedure into the kitchen unit is given in the
Installation Manual. This product is intended to be used in
proper kitchen units only.
• The appliance must be connected with a properly installed fused
socket. Power supply (AC) and voltage at the operating point
must with the details on the name plate of the appliance (name
plate is located on the inside left of the appliance).
• Insert the plug into a socket with an efficient ground connection.
If the socket has no ground contact or the plug does not match,
we suggest you to call an authorized electrician for a
ssistance.
• Manufacturer is not resp onsible for failure to complete the
ground connection as described in this booklet.
• There can be an odor when you first switch on the appliance. It will disappear after
the appliance starts to cool.
PDF created with pdfFactory Pro trial version www.pdffactory.com
UK