User Manual

4
*%
1.4 IMPORTANT INSTRUCTIONS
1. During use, the heating zones of the ceramic hob as well as the oven compartment
become very hot. Keep children well away !
2. Overheated fats or oils can ignite easily. Therefore prepare this kind of foods only
under supervision !
3. In case of any disturbances, disconnect the appliance from the electric mains.
4. During use the appliance becomes hot. Care should be taken to avoid touching
heating elements inside the oven.
5. Use protective gloves when taking the dishes away from the gas hob or the baking
tins out of the oven.
6. Never use the pan and oven compartments for storing inflammable or heat-sensitive
items.
8. Never overload the opened oven door. You must not press on it.
9. Connection leads of other household electrical equipment, used while the cooker is
being operated, should be kept away from its hot elements.
10. Do not use the appliance for heating rooms.
WARNING !
When you notice any cracks or breaks on the cooking zones of the ceramic hob, the
cooker must be immediately disconnected from use, and the service should be called
for.
1.5 PREPARING FOR USE
1. Clean enamel and glass surfaces with a soft, moist cloth.
2. Clean oven, wire shelf, backing trays and the like with the use of washing liquids.
3. Before using the appliance for the very first time, we recommend heating particular
cooking zones for about 3 minutes, without putting dishes on them.
4. Operate the oven at the highest temperature for around 1 hour.
Any smoke and odour occurring is harmless, if the kitchen is well ventilated, e.g. by
opening the window.
INSTALLATION
2 INSTALLATION
2.1 POSITIONING
Remove all packaging components off the cooker, including protective coatings
applied to chromium-plated surfaces and stainless steel components.
Kitchen room shall be dry and well ventilated. Cooker shall be positioned so as to
ensure free access to all its controls.
By placing the cooker in series with kitchen furniture the distance between its cooker
lateral walls and the cupboards cannot be less than 30mm.
The distance between the heating plate and kitchen hood shall be at least 650 mm.
Level the cooker before using it. To do this, use adjustable feet accessible when you
remove the drawer.
13
(6
Para la limpieza no se debe emplear polvos de grano grueso que provocan rayas
en la superficie, esponjas abrasivas, agentes químicos agresivos ni objetos agudos.
Las partes fabricadas de chapa inoxidable así como los mandos y el panel de
mandos limpiarlos con líquidos suaves sin agentes abrasivos.
Las bandejas, los moldes así como las bandejas para asar la carne o los asadores
hay que mojar en agua caliente con un poco de detergente, luego lavar y secar.
Controlar la limpieza de la guarnición de la puerta del horno.
5.2 LIMPIEZA DE LA ENCIMERA VITROCERÁMICA
La superficie de la encimera cerámica debe limpiarse sistemáticamente después
de cada uso ya que incluso los restos diminutos se queman durante la siguiente
cocción.
La encimera debe limpiarse con los detergente especiales destinados para este
fin.
No se deben usar esponjas metálicas o polvos abrasivos.
El ensuciamiento ligero hay que eliminarlo con un paño húmedo o esponja (figura
14a) mojada en agua con detergente suave y luego secar.
El ensuciamiento fuerte hay que eliminarlo con agentes especiales para la limpieza
de encimeras vitrocerámicas.
Para quitar restos de alimentos de la encimera, es mejor utilizar un utensilio especial
(figura 14b) cuidando de no rayar la superficie de la encimera.
!ATENCIÓN!
Para limpiar la encimera cerámica no usar agentes para la limpieza de hornos ya que son
muy agresivos y pueden dañar seriamente la superficie de la encimera.
LIMPIEZA Y MANTENIMIENTO
a) b)
Fig. 14
Los objetos fácilmente fundibles como papel de aluminio o utensilios de plástico,
hay que almacenarlos fuera de los focos calientes. En caso de que se fundan, hay
que limpiarlos de la superficie de la encimera inmediatamente. Proceder igual
con alimentos que contengan mucho azúcar ya que éste al fundirse puede teñir la
placa de modo irreversible.
Los utensilios usados para la cocción en la encimera vitrocerámica deben estar
limpios y secos. Fíjese en el fondo de la olla ya que los restos allí pegados se
quemarán durante el uso siguiente.