User Manual

INSTALLATION

 There must not be any cabinet fitted right above the hob.

 In case of mounting a horizontal partition "A" under the hob, leave the distance at least 150mm

between the hob and the partition (Fig. 6).

Fig. 5 Fig. 6

2.2 GAS HOB INSTALLATION

1. Make the 490 x 560 [mm] rectangular cut-out in the worktop. The dimensions of the cut-out can be

found in Fig. 7.

2. The hob is equipped with a seal with tape-protected adhesive surface. Remove the tape from the

seal.

3. Turn the hob upside down and stick the seal around the internal edge (Fig. 8).

Fig. 7 Fig. 8

4. Place the hob in the middle of the cut-out and push it so that the seal adheres tight to the worktop.

5. Fix the hob with the four brackets which are included together with other connecting parts (Fig. 9 and

10).