Owner manual

40
The symbol will flash on the display after 30 hours of operation of the hood. This message
tells you that that it is necessary to clean your filter cartridge.
After cleaning the filter cartridge, press button
BB
for 3 seconds to stop the warning light
FILTER CARTRIDGE SATURATION INDICATOR
- Every time the speed selection button (
CC
) is pressed, the following cycle is defined: speed 1, 2,
3 or 4 then return to speed 1.
- Every time the hood is used it will start up at the last selected speed.
•
•Speed selection
•Timer selection
— Pressing E will activate the timer; the hood will shut down after 10 minutes. A will flash on
the display to tell you that the hood is in timer mode.
•
DESCRIPTION OF CONTROL PANEL
Tip
This Guide to Installation and Use is valid for several models. Minor differences in
details and fittings may emerge between your appliance and the descriptions provided.
3 / USING YOUR APPLIANCE
E
A C
D
B
EN
Lighting
A
B
C
Timer/Delayed shutdown (10
Min)
Indicator
Speed selection
(1 to 4)
D
E
On/Off
Speed display (1, 2, 3 or 4)
Timer
Filter saturation