User manual

B) To Set The Timer To Switch Off Only

i) Ensure the electricity supply is switched ON and

that the correct time of day is displayed, e.g.

10.00am as Fig. 9.

ii) Place food in oven.

iii) To set the length of cooking time, press the

cooking hours button ( ) and while holding it

down, turn the increase control ( + ) until the

required length of cooking time is displayed, e.g.

2 hrs 15 mins as Fig. 10. Turn the decrease

control (-) if necessary.

iv) Release the buttons. The AUTO display will

glow and the time of day will be displayed after 5

seconds.

v) Set the oven temperature.

vi) To check the stop time during the cooking period,

simply press the stop time button ( ) and the

stop time will be displayed, as Fig. 11.

4. To Return The Cooker To Manual After An

Automatic Programme

To return the cooker to manual operation after an

automatic programme, follow the steps given

below.

At the end of a timed cooking period, the AUTO

light will flash and a bleeper will sound for up to 2

minutes. This can be stopped by pressing any of

the buttons as Fig. 12.

Turn oven control to the OFF position. The

AUTO display will continue to flash.

Press ( ) button. The AUTO display will go out

as Fig.13.

Fig. 13

Fig. 12

Fig. 9

Fig. 11

Fig. 10