User manual

29
THE OVEN CLEANING CYCLE – BOTH
OVENS
1. Remove oven shelves, wirework runners and
bakeware from oven.
2. Turn the required oven temperature control to
220°C and allow the oven to run for an hour or two
per week to ensure continued good performance
from the Stayclean finish.
THINGS TO NOTE
· The oven indicator neon will glow until the oven
has reached the desired temperature and then
go out. It will then turn on and off showing that
the oven temperature is being maintained.
· The internal oven light will come on.
· The cooling fan for the controls will operate after
a short time when the oven cleaning cycle is
selected. It may run on after the controls are
switched off until the cooker has cooled. See
page 6 for more details on the operation of the
cooling fan
HINTS AND TIPS
· Slight discolouration and polishing of the
Stayclean surfaces may occur in time, but this
will not affect their self cleaning properties.
· A good time to use the oven cleaning cycle is
after the weekly roast.
If you do a lot of roasting and very little baking
you should follow the cleaning cycle every week.
If you roast very little you will only need to follow
the cleaning cycle every 2 – 3 weeks.
· Follow the recommendations below to keep
soilage to a minimum.
COOKING TO REDUCE SOILAGE.
· Cook at the recommended temperatures. Higher
temperatures during roasting will increase
soilage. Try cooking at lower temperature for an
increased length of time, you will save energy
and often the joint is more tender.