Operation Manual

6
BASIC TIPS
Once the programme has
ended, the “End of
Programme” message
flashes on and off the dis-
play.
This message stays there
until the ON/OFF button
is pressed, or the door
is opened and closed (in
which case the display
shows the last programme
used, i.e. the one that has
just finished.
4
END OF PROGRAMME
There a few things you should always bear in mind. If you do, your dishwasher will last longer and
wash better.
Fill the dishwasher: Try to make the most of your dishwasher’s capacity. This will help you
reduce water and electricity consumption and lead to quieter operation.
Position utensils correctly. For best quality washes, the spray arms should be able to spin
freely. Likewise, the utensils should be positioned correctly to ensure that they are reached by
the jet of water.
Programme selection. Select the correct wash programme and additional functions as required.
Cleaning. Clean the filters and spray arms every three months. Also check that they are correctly
in place.
a
b
c
d
79
If there is a power cut, the
dishwasher stops working,
but it keeps the
programme in its memory
(cycle, operating
conditions) for an indefinite
period of time. So, when
the power returns, the
dishwasher continues the
same programme under
the same conditions and
at the point where the
power went off.
However, if while the power
is off, you press the
5
POWER CUTS
ON/OFF button , the
current programme is
deleted and when the
dishwasher comes back
on, the last programme
used is shown on the
display.
English
END PROGRAMME