Owner's Manual

13
CLEANING YOUR APPLIANCE
 Turn off the power, unplug the appliance, and
remove all interior items including shelves and
racks.
 Wash the inside surfaces with a warm water and
baking soda solution. The solution should be
about 2 tablespoons of baking soda and 2 cups
of water.
 Wash the shelves with warm soapy water.
 Wring excess water out of your sponge or cloth
when cleaning any area of the control panel.
 Wash the outside cabinet with warm water and
warm soapy water. Rinse well and wipe dry with
a clean soft cloth.
 Do not clean the stainless steel with steel
wool pads. We suggest using an all-in-one
stainless steel cleaner to clean the stainless
steel parts of the unit. Test the cleaner on a
small area before you apply it to the entire
surface. Follow the manufacturer’s instructions
closely.
POWER FAILURE
 In the event of a power outage/failure, all
previous temperature settings are automatically
memorized and reinstated. If power is
interrupted and then powered up again, the unit
will operate with the last temperature set-point.
 Most power failures are corrected within a few
hours and should not affect the interior
temperature of your appliance provided that the
door remains shut. If the power is going to be off
for a longer period of time, you need to take the
proper steps to protect the contents of your unit.
VACATION TIME
 Short absences: Leave the Wine Cooler in
operation for absences of less than three weeks.
 Long absences: If the appliance will not be
used for over a month, remove all items, turn off
the appliance and unplug. Clean and dry the
interior thoroughly. To prevent odor and mold
growth, leave the door slightly open, propping it
open if necessary.
MOVING YOUR APPLIANCE
 Remove all items from inside the unit.
 Securely tape down all loose parts (shelves)
inside your appliance. We recommend using
masking tape or any tape with an easily
removable adhesive so as to not ruin any finish
on your unit.
 Turn the adjustable leg up towards the base to
avoid damage.
 Tape the door shut.
 Make sure the appliance stays secure in the
upright position during transportation. Also,
protect the outside of the appliance with a thick
blanket or similar item.
ENERGY SAVING TIPS
 The appliance should be located in the coolest
area of the room, away from heat producing
appliances and out of direct sunlight.
 Ensure that the unit is adequately ventilated.
Never cover air vents. Clean dust and dirt from
the condenser regularly.
 Only open the door for as long as necessary and
for as short a time as possible.
 Store your contents in an organized way.
 Do not over-fill the appliance in order to better
allow air to circulate.