Instructions / Assembly

Electric Baseboard
Heaters
2500 & C2500 Series
WARNING
Instal l ation, Operation & Mainte nance Instructions
Dear Owner,
Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered Products.
You have made a wise investment selecting the highest quality product in the heating industry. Please care-
fully read the installation and maintenance instructions shown in this manual. You should enjoy years of
efficient heating comfort with this product from Marley Engineered Products... the industry’s leader in de-
sign, manufacturing, quality and service.
... The Employees of
Marley Engineered Products
Read Carefully - This Instruction Sheet contains vital in-
formation for the proper installation, use, and efficient oper-
ation of the heater. Carefully read the manual before
installation, operation, or cleaning of the heater. Failure to
adhere to the instructions could result in fire, electric shock,
death, serious personal injury, or property damage. Save
these instructions and review frequently for continuing safe
operation and instructing future users.
CAUTION - TO REDUCE RISK OF FIRE AND ELECTRIC
SHOCK OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
1. Keep all electrical cords, foam filled articles, drapes,
bedding, and other household furnishings away from
contact with heater. It is recommended all items be kept
a minimum of six (6") inches (152mm) from heater.
2. Do not install baseboard heater below electrical con-
venience receptacles (outlets).
3. Do not install upside down or in any position other than
as shown in this manual.
4. Do not install baseboard heater against vinyl wallpaper,
paperboard or low density fiberboard surface. Do not
install vinyl drapes or vinyl blinds above heater.
5. Do not recess heater in wall.
6. The installation must comply with applicable Local and
National Electrical Codes and utility requirements.
7. Do not remove or by-pass the safety limit (see Figure 4).
8. To reduce the risk of fire, do not store or use gasoline or
other flammable vapors and liquids in the vicinity of the
heater.
9. Personal injury or death could result from electric shock.
Disconnect all power to heater at main panel before
attempting to install or service this heater.
10. Supply voltage must be the same as heater voltage.
Check heater nameplate and supply voltage before
energizing.
11. When using RSA Transformer Relay Accessory, supply
wiring must be suitable for 90°C.
!
File #E37116