Installation Guide

ManualsBrandsFahrenheat ManualsHeating, Ventilation, and Air Conditioning4,000-Watt Wall Heater

1

2

3

4

5

6

7

8

9

Step 4

•

Insert power cable

through the cable

clamp and allow at

least 6” of wire to

enter the back box.

•

Tighten the cable

clamp so the wire is

snug and held in

place. (Do not over

tighten)

Note: If you are using a two wire with a ground

for a 240 volt heater, place a piece of black

electrical tape at the end of the white wire to

show it is a hot lead and not a neutral wire.