User Manual

05/12 14 51285 Rev. 1
Section 4: Operation
4.1. PROPER OPERATION
The following describes the proper manner of operating the Pallet Weigh pallet jack
scale.
 For accurate weights, do not weigh on a grade greater than 2
degrees.
 Use the pallet jack scale on a smooth surface. Irregular
surfaces may cause damage the scale and inaccurate weights.
 Do not load the scale greater than the rated capacity
otherwise the scale can be damaged.
 Do not lift loads by the end of the forks only as this could
damage the scale weighing mechanisms.
4.2. FRONT PANEL LAYOUT