Software Utility Program

Section 4: Input / Output
01/13 30 51297 Rev. 1
SEL
EXIT
POWER
SHIFT
ALARM
LF
GROUP
Micro Feed
Down
FF/LOAD
Micro Feed
Up
ITEM
MENU
TEAR
SET
PARK
PRINT
QUIET
TOF
SEL
MENU
4.3. Okidata 420 Form Printer
Program the FB2255 the following settings.
Transmission
RS232
Baud Rate
9600
Data Bits
8
Stop Bit
1
OUTPUT
“BUTTON” for Print Key
NOTE: Always restart the printer after making any switch changes.
1. To enter MENU MODE, press and hold the SHIFT key while pressing the
SELECT key.
– The MENU legend will be illuminated while in the Menu Mode.
2. With the printer in the Menu Mode, press PRINT to print the complete menu.
– The current default settings print out.
– It is recommended to use tractor fed paper.
NOTE: The Printed Menu selections are different for each Emulation Mode.
3. Press GROUP to select the relevant group that needs to be changed.
– Found on the left-hand column on the Menu Printout.
4. Press ITEM to select the relevant item within the selected group.
– Found on the Item is the center column on the Menu Printout.
5. Press SET to cycle through the settings available for the item to change.
– The settings are the right-hand column on the Menu Printout.
6. Press and hold the SHIFT key while pressing the SELECT key to exit the
Menu Mode.
Printer Cable ( 15599 ) is used for this printer.
FB