User guide

04/12 36 51173 Rev. 8
Section 5: Parts
SCALE COMPONENTS
Part # Description
80984
1 1/8" -7 x 8" Threaded Rod, Zinc (module-module)
54255
1
1
/
8
" Flat Washer (module-module)
61743
Clamp Bar Washer (base plates)
62857
5
/
8
" x 6" Anchor Bolts
55010
Ground Rod Kit
73682
Shim, receiver cup,
1
/
16
"
64338
Shim, receiver cup, 1/8"
64334
Shim, receiver cup, 3/16"
63319
Side check bracket w/bumper bolts (1” x 5”)
64208
Shim, longitudinal ¼”
64209
Shim, longitudinal 1/16”
70045
Shim kit - 1 dozen mixed longitudinal
54304
1 1/8"-7 Hex nut
54891
1 1/8-7 Jam nut
LOAD CELLS AND LOAD CELL HARDWARE
Part #
Description
80453
Load Cell, 6” RC, 100k,1k Ω, 2 mV/V w/15’ cable (LCF-HR4020-21)
11’ wide ONLY
144210
Load Cell, 6” RC, 100k,1k Ω, 2 mV/V w/20’ cable (LCF-HR4020-24)
12’ and 14’ wide models
72274
"O" Ring, 5½", INSIDE of Cup,*ANSI #222
64340
"O" Ring, 5½", OUTSIDE of Cup*ANSI #228
87481
Receiver Cup, LOWER (w/ anti-rotation pin)
87482
Receiver Cup,, UPPER
64382
Roll Pin, ½" x 2½" anti-rotation, base plate
63981
Anti-Rotation Pin, LOWER Receiver Cup 3/8" x 2½"
107118
Locating Tool 6"
* ANSI# XXX: defines a standard "O" ring size. "O" rings may be obtained at many
hardware, hydraulic, or plumbing supply house by using the number.