Datasheet

©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
4NXXM, H11B1M, TIL113M Rev. 1.0.3 4
4N29M, 4N30M, 4N32M, 4N33M, H11B1M, TIL113M — General Purpose 6-Pin Photodarlington Optocoupler
Electrical Characteristics
(T
A
= 25°C Unless otherwise specified.) (Continued)
Isolation Characteristics
* Indicates JEDEC registered data.
Notes:
1. The current transfer ratio(I
C
/I
F
) is the ratio of the detector collector current to the LED input current.
2. Pulse test: pulse width = 300µs, duty cycle ≤ 2.0% .
3. I
F
adjusted to I
C
= 2.0mA and I
C
= 0.7mA rms.
4. The frequency at which I
C
is 3dB down from the 1kHz value.
5. For this test, LED pins 1 and 2 are common, and phototransistor pins 4, 5 and 6 are common.
Safety and Insulation Ratings
As per IEC 60747-5-2, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data.
Compliance with the safety ratings shall be ensured by means of protective circuits.
Symbol Characteristic Test Conditions Device Min. Typ. Max. Units
V
ISO
Input-Output Isolation Voltage
(5)
f = 60Hz, t = 1 sec. All 7500 V
AC
PEAK
VDC 4N32M* 2500 V
VDC 4N33M* 1500
R
ISO
Isolation Resistance
(5)
V
I-O
= 500VDC All 10
11
Ω
C
ISO
Isolation Capacitance
(5)
V
I-O
= Ø, f = 1MHz All 0.8 pF
Symbol Parameter Min. Typ. Max. Unit
Installation Classifications per DIN VDE 0110/1.89
Table 1
For Rated Main Voltage < 150Vrms I-IV
For Rated Main voltage < 300Vrms I-IV
Climatic Classification 55/100/21
Pollution Degree (DIN VDE 0110/1.89) 2
CTI Comparative Tracking Index 175
V
PR
Input to Output Test Voltage, Method b,
V
IORM
x 1.875 = V
PR
, 100% Production Test
with tm = 1 sec, Partial Discharge < 5pC
1594 V
peak
Input to Output Test Voltage, Method a,
V
IORM
x 1.5 = V
PR
, Type and Sample Test
with tm = 60 sec, Partial Discharge < 5pC
1275 V
peak
V
IORM
Max. Working Insulation Voltage 850 V
peak
V
IOTM
Highest Allowable Over Voltage 6000 V
peak
External Creepage 7 mm
External Clearance 7 mm
Insulation Thickness 0.5 mm
RIO Insulation Resistance at Ts, V
IO
= 500V 10
9
Ω