Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsLogic ICsLogic IC - Inverter Inverter 74AC SOIC 14

74AC04, 74ACT04 Hex Inverter

September

2007

74AC04, 74ACT04 Rev. 1.0

74AC04, 74ACT04

Hex Inverter

Features

■

reduced by 50% on 74AC only

■

Outputs source/sink 24mA

■

ACT04 has TTL-compatible inputs

General Description

The AC/ACT04 contains six inverters.

Ordering Information

Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. (PC not available in

Tape and Reel.)

All packages are lead free per JEDEC: J-STD-020B standard.

Connection Diagram

Pin Description

Logic Symbol

IEEE/IEC

Order

Number

Package

Number Package Description

74AC04SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow

74AC04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

74AC04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

74AC04PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

74ACT04SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow

74ACT04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

74ACT04PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

Pin Names Description

Inputs

Outputs

FACT™ is a trademark of Fairchild Semiconductor Corporation.

Summary of content (10 pages)

PAGE 1
74AC04, 74ACT04 Hex Inverter tm Features General Description ■ ICC reduced by 50% on 74AC only The AC/ACT04 contains six inverters. ■ Outputs source/sink 24mA ■ ACT04 has TTL-compatible inputs Ordering Information Order Number Package Number Package Description 74AC04SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74AC04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.
PAGE 2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC IIK Parameter Rating Supply Voltage –0.5V to +7.0V DC Input Diode Current VI = –0.5V –20mA VI = VCC + 0.
PAGE 3
TA = +25°C Symbol VIH Parameter VCC (V) Minimum HIGH Level Input Voltage 3.0 Maximum LOW Level 3.0 Input Voltage 4.5 Minimum HIGH Level 3.0 Output Voltage Conditions VOUT = 0.1V or VCC – 0.1V 2.1 2.1 2.25 3.15 3.15 2.75 3.85 3.85 1.5 0.9 0.9 2.25 1.35 1.35 2.75 1.65 1.65 2.99 2.9 2.9 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 4.5 VOUT = 0.1V or VCC – 0.1V 5.5 VOH Guaranteed Limits 1.5 5.5 VIL Typ.
PAGE 4
Symbol VIH VIL VOH Parameter VCC (V) Conditions Typ. TA = –40°C to +85°C Guaranteed Limits VOUT = 0.1V or VCC – 0.1V 1.5 2.0 2.0 1.5 2.0 2.0 VOUT = 0.1V or VCC – 0.1V 1.5 0.8 0.8 5.5 1.5 0.8 0.8 4.5 IOUT = –50µA 4.49 4.4 4.4 5.49 5.4 5.4 Minimum HIGH Level Input Voltage 5.5 Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage TA = +25°C 4.5 4.5 5.5 Units V V V VIN = VIL or VIH: VOL Maximum LOW Level Output Voltage 4.5 IOH = –24mA 3.86 3.76 5.
PAGE 5
TA = +25°C, CL = 50pF Symbol tPLH tPHL Parameter TA = –40°C to +85°C, CL = 50pF VCC (V)(6) Min. Typ. Max. Min. Max. Units 3.3 1.5 4.5 9.0 1.0 10.0 ns 5.0 1.5 4.0 7.0 1.0 7.5 Propagation Delay Propagation Delay 3.3 1.5 4.5 8.5 1.0 9.5 5.0 1.5 3.5 6.5 1.0 7.0 ns Note: 6. Voltage range 3.3 is 3.3V ± 0.3V. Voltage range 5.0 is 5.0V ± 0.5V. AC Electrical Characteristics for ACT TA = +25°C, CL = 50pF Symbol Parameter TA = –40°C to +85°C, CL = 50pF VCC (V)(7) Min. Typ.
PAGE 6
74AC04, 74ACT04 Hex Inverter Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.
PAGE 7
4AC04, 74ACT04 Hex Inverter Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.
PAGE 8
74AC04, 74ACT04 Hex Inverter Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.
PAGE 9
74AC04, 74ACT04 Hex Inverter Physical Dimensions (Continued) Dimensions are in inches (millimeters) unless otherwise noted. Figure 4. 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.
PAGE 10
ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDriv