Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsRectifiersRectifier Bridge Case type TS-6P U(RRM) 1000 V

DFB2005 - DFB20100 — Glass-Passivated Bridge Rectifiers

DFB2005 - DFB20100 Rev. 1.2.2 1

October 2013

DFB2005 - DFB20100

Glass-Passivated Bridge Rectifiers

Features

• UL Certificate: # E258596

• Glass-Passivated Junction

• Ideal for Printed Circuit Board

• Reliable Low-Cost Construction

• Plastic Material has Underwriters Laboratory Flammability Classification 94V-0

• Surge Overload Rating to 250 A Peak

• High Case Dielectric Strength: 2000 V

RMS

• Isolated Voltage from Case to Lead: > 2500 V

Ordering Informations

Part Number Marking Package Packing Method

DFB2005 DFB2005

TS-6P 4L Rail

DFB2010 DFB2010

DFB2020 DFB2020

DFB2040 DFB2040

DFB2060 DFB2060

DFB2080 DFB2080

DFB20100 DFB20100

TS-6P

Summary of content (5 pages)

PAGE 1
DFB2005 - DFB20100 Glass-Passivated Bridge Rectifiers Features • • • • • • • • UL Certificate: # E258596 Glass-Passivated Junction Ideal for Printed Circuit Board Reliable Low-Cost Construction Plastic Material has Underwriters Laboratory Flammability Classification 94V-0 Surge Overload Rating to 250 A Peak High Case Dielectric Strength: 2000 VRMS Isolated Voltage from Case to Lead: > 2500 V + ~ ~ - TS-6P Ordering Informations Part Number Marking DFB2005 DFB2005 DFB2010 DFB2010 DFB2020 DFB2020
PAGE 2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
PAGE 3
Average Forward Current, [A] 25 20 15 10 5 0 0 20 40 60 80 100 120 140 160 o Case Temperature, [ C] Figure 1. Maximum Derating Curve for Output Current Figure 2. Maximum Forward Surge Current per Leg Figure 3. Typical Reverse Characteristics per Leg Figure 4. Typical Forward Characteristics per Leg Figure 5. Typical Junction Capacitance © 2009 Fairchild Semiconductor Corporation DFB2005 - DFB20100 Rev. 1.2.2 www.fairchildsemi.
PAGE 4
TS-6P 30.30 29.70 CL 3.40 3.10 3.0 x45 11.20 10.80 4.20 3.80 + ~ ~ 4.80 4.40 4.80 3.80 3.40 20.30 19.70 - 2.50 18.00 17.00 2.40 (4X) 2.00 2.90 2.50 1.10 (4X) 0.90 7.50 7.30 10.20 9.80 0.70 0.60 7.70 7.30 NOTES: A. THIS PACKAGE DOES NOT CONFORM TO ANY STANDARDS. B. ALL DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. D. DRAWING FILE NAME: TS6P04AREV1 Figure 6.
PAGE 5
TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.