Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsRectifiersRectifier Bridge Case type TS-6P U(RRM) 200 V

DFB2505 - DFB25100 — Glass-Passivated Bridge Rectifiers

DFB2505 - DFB25100 Rev. 1.2.2 1

November 2013

DFB2505 - DFB25100

Glass-Passivated Bridge Rectifiers

Features

• UL Certificate: # E258596

• Glass-Passivated Junction

• Ideal for Printed Circuit Board

• Reliable Low-Cost Construction

• Plastic Material has Underwriters Laboratory Flammability Classification 94V-0

• Surge Overload Rating: 350 A Peak

• High Case Dielectric Strength: 2500 V

RMS

• Isolated Voltage from Case to Lead: > 2500 V

Ordering Informations

Part Number Marking Package Packing Method

DFB2505 DFB2505

TS-6P 4L Rail

DFB2510 DFB2510

DFB2520 DFB2520

DFB2540 DFB2540

DFB2560 DFB2560

DFB2580 DFB2580

DFB25100 DFB25100

TS-6P

Summary of content (5 pages)

PAGE 1
DFB2505 - DFB25100 Glass-Passivated Bridge Rectifiers Features • • • • • • • • UL Certificate: # E258596 Glass-Passivated Junction Ideal for Printed Circuit Board Reliable Low-Cost Construction Plastic Material has Underwriters Laboratory Flammability Classification 94V-0 Surge Overload Rating: 350 A Peak High Case Dielectric Strength: 2500 VRMS Isolated Voltage from Case to Lead: > 2500 V + ~ ~ - TS-6P Ordering Informations Part Number Marking DFB2505 DFB2505 DFB2510 DFB2510 DFB2520 DFB2520 DF
PAGE 2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
PAGE 3
Figure 1. Maximum Derating Curve for Output Current Figure 2. Maximum Forward Surge Current Figure 3. Typical Reverse Characteristics per Leg Figure 4. Typical Forward Characteristics per Leg Figure 5. Typical Junction Capacitance © 2009 Fairchild Semiconductor Corporation DFB2505 - DFB25100 Rev. 1.2.2 www.fairchildsemi.
PAGE 4
TS-6P 30.30 29.70 CL 3.40 3.10 3.0 x45 11.20 10.80 4.20 3.80 + ~ ~ 4.80 4.40 4.80 3.80 3.40 20.30 19.70 - 2.50 18.00 17.00 2.40 (4X) 2.00 2.90 2.50 1.10 (4X) 0.90 7.50 7.30 10.20 9.80 0.70 0.60 7.70 7.30 NOTES: A. THIS PACKAGE DOES NOT CONFORM TO ANY STANDARDS. B. ALL DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. D. DRAWING FILE NAME: TS6P04AREV1 Figure 6.
PAGE 5
TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.