Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsBJTs & IGBTsTransistor

FFB3946 / FMB3946 — NPN & PNP General Purpose Amplifier

FFB3946 / FMB3946 Rev. 1.1.0 1

August 2013

FFB3946 / FMB3946

NPN & PNP General-Purpose Amplifier

Ordering Information

Block Diagram

Part Number Top Mark Package Packing Method

FFB3946 AB SC70 6L Tape and Reel

FMB3946 002 SSOT 6L Tape and Reel

Figure 1. Block Diagram

Pin#1

SC70-6

Mark: .AB

Dot denotes pin#1

TRANSISTOR TYPE

C1 B1 E1 NPN

C2 B2 E2 PNP

pin#1

SuperSOT

-6

Mark: .002

Dot denotes pin#1

FFB3946 Device Package

FMB3946 Device Package

E2B2C1

C2B1E1

FFB3946 Internal Connection

FMB3946 Internal Connection

Description

This complementary device is designed for use as a gen-

eral-purpose amplifier and switch, The useful dynamic

range extends to 100 mA as a switch and 100 MHz as an

amplifier. Sourced from Process 23 and 66. See

FFB3904 (NPN) and FFB3906 (PNP) for characteristics.

Summary of content (6 pages)

PAGE 1
FFB3946 / FMB3946 NPN & PNP General-Purpose Amplifier Description This complementary device is designed for use as a general-purpose amplifier and switch, The useful dynamic range extends to 100 mA as a switch and 100 MHz as an amplifier. Sourced from Process 23 and 66. See FFB3904 (NPN) and FFB3906 (PNP) for characteristics.
PAGE 2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
PAGE 3
Values are at TA = 25°C unless otherwise noted. Symbol Parameter Test Condition Min. Typ. Max. Units Off Characteristics V(BR)CEO Collector-Emitter Breakdown Voltage IC = 10 mA, IB = 0 IC = 10 μA, IE = 0 V(BR)CBO Collector-Base Breakdown Voltage 40 V 40 V Emitter-Base Breakdown Voltage IE = 10 μA, IC = 0 5.0 V ICBO Collector Cut-Off Current VCB = 30 V, IE = 0 50 nA IEBO Emitter Cut-Off Current VEB = 4.
PAGE 4
FFB3946 / FMB3946 — NPN & PNP General Purpose Amplifier Physical Dimensions SC70 6L SYMM C L 2.00±0.20 0.65 A 0.50 MIN 6 4 B PIN ONE 1.25±0.10 1 1.90 3 0.30 0.15 (0.25) 0.40 MIN 0.10 0.65 A B 1.30 LAND PATTERN RECOMMENDATION 1.30 1.00 0.80 SEE DETAIL A 1.10 0.80 0.10 C 0.10 0.00 C 2.10±0.30 SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE (R0.10) 0.25 0.10 0.20 A) THIS PACKAGE CONFORMS TO EIAJ SC-88, 1996. B) ALL DIMENSIONS ARE IN MILLIMETERS.
PAGE 5
FFB3946 / FMB3946 — NPN & PNP General Purpose Amplifier Physical Dimensions (Continued) SSOT 6L Figure 3. 6-LEAD, SUPERSOT6, JDEC MO-193, 1.6 MM WIDE (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 6
TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.