Datasheet
©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3150 Rev. 1.0.4 4
FOD3150 — High Noise Immunity, 1.0A Output Current, Gate Drive Optocoupler
Absolute Maximum Ratings
(T
A
= 25ºC unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Isolation Characteristics
Apply over all recommended conditions, typical value is measured at T
A
= 25ºC
Symbol Parameter Value Units
T
STG
Storage Temperature -55 to +125 ºC
T
OPR
Operating Temperature -40 to +100 ºC
T
J
Junction Temperature -40 to +125 ºC
T
SOL
Lead Wave Solder Temperature
(refer to page 19 for reflow solder profile)
260 for 10sec ºC
I
F(AVG)
Average Input Current 25 mA
V
R
Reverse Input Voltage 5 V
I
O(PEAK)
Peak Output Current
(1)
1.5 A
V
CC
– V
EE
Supply Voltage 0 to 35 V
V
O(PEAK)
Peak Output Voltage 0 to V
CC
V
t
R(IN)
, t
F(IN)
Input Signal Rise and Fall Time 500 ns
PD
I
Input Power Dissipation
(2)(4)
45 mW
PD
O
Output Power Dissipation
(3)(4)
250 mW
Symbol Parameter Value Units
T
A
Ambient Operating Temperature -40 to +100 °C
V
CC
– V
EE
Power Supply 15 to 30 V
I
F(ON)
Input Current (ON) 7 to 16 mA
V
F(OFF)
Input Voltage (OFF) 0 to 0.8 V
Symbol Parameter Conditions Min. Typ. Max. Units
V
ISO
Input-Output Isolation
Voltage
T
A
= 25ºC, R.H.< 50%, t = 1.0min,
I
I-O
≤
10µA, 50Hz
(5)(6)
5000 V
RMS
R
ISO
Isolation Resistance V
I-O
= 500V
(5)
10
11
Ω
C
ISO
Isolation Capacitance V
I-O
= 0V, Freq = 1.0MHz
(5)
1pF