Datasheet

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3184 Rev. 1.0.4 4
FOD3184 — 3A Output Current, High Speed MOSFET/IGBT Gate Driver Optocoupler
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
Parameter
Value Units
T
STG
Storage Temperature -40 to +125 °C
T
OPR
Operating Temperature -40 to +100 °C
T
J
Junction Temperature -40 to +125 °C
T
SOL
Lead Solder Temperature – Wave solder
(Refer to Reflow Temperature Profile, pg. 22)
260 for 10 sec. °C
I
F(AVG)
Average Input Current
(1)
25 mA
I
F(tr, tf)
LED Current Minimum Rate of Rise/Fall 250 ns
V
R
Reverse Input Voltage 5 V
I
OH(PEAK)
“High” Peak Output Current
(2)
3A
I
OL(PEAK)
“Low” Peak Output Current
(2)
3A
V
DD
– V
SS
Supply Voltage -0.5 to 35 V
V
O(PEAK)
Output Voltage 0 to V
DD
V
P
O
Output Power Dissipation
(3)
250 mW
P
D
Total Power Dissipation
(3)
295 mW
Symbol
Parameter
Value Units
V
DD
– V
SS
Power Supply 15 to 30 V
I
F(ON)
Input Current (ON) 10 to 16 mA
V
F(OFF)
Input Voltage (OFF) -3.0 to 0.8 V