Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsOptoelectronics & DisplaysFODM3063

FODM3062, FODM3063, FODM3082, FODM3083 — 4-Pin Full Pitch Mini-Flat Package Zero-Cross Triac Driver Output Optocouplers

FODM3062, FODM3063, FODM3082, FODM3083 Rev. 1.0.9

September 2010

FODM3062, FODM3063, FODM3082, FODM3083

4-Pin Full Pitch Mini-Flat Package Zero-Cross

Triac Driver Output Optocouplers

Features

■

dv/dt of 600V/µs guaranteed

■

Compact 4-pin surface mount package

(2.4mm maximum standoff height)

■

Zero voltage crossing

■

Peak blocking voltage: 600V (FODM306X)

800V (FODM308X)

■

Available in tape and reel quantities of 2500

■

C-UL, UL and VDE certiﬁcations pending

Applications

■

Solenoid/valve controls

■

Lighting controls

■

Static power switches

■

AC motor drives

■

Temperature controls

■

E.M. contactors

■

AC motor starters

■

Solid state relays

Description

The FODM306X and FODM308X series consist of an

infrared emitting diode optically coupled to a monolithic

silicon detector performing the function of a zero voltage

crossing bilateral triac driver, and is housed in a compact

4-pin mini-ﬂat package. The lead pitch is 2.54mm. They

are designed for use with a triac in the interface of logic

systems to equipment powered from 115/240 VAC lines,

such as solid state relays, industrial controls, motors,

solenoids and consumer appliances.

Package Dimensions

4.40±0.20

2.54±0.25

3.60±0.30

2.00±0.20

0.10±0.10

0.40±0.10

5.30±0.30

7.00

+0.2

–0.7

0.20±0.05

MAIN TERM.

ANODE

CATHODE

MAIN TERM.

ZERO

CROSSING

CIRCUIT

Note:

All dimensions are in millimeters.

Summary of content (13 pages)

PAGE 1
FODM3062, FODM3063, FODM3082, FODM3083 4-Pin Full Pitch Mini-Flat Package Zero-Cross Triac Driver Output Optocouplers Features Description ■ dv/dt of 600V/µs guaranteed The FODM306X and FODM308X series consist of an infrared emitting diode optically coupled to a monolithic silicon detector performing the function of a zero voltage crossing bilateral triac driver, and is housed in a compact 4-pin mini-flat package. The lead pitch is 2.54mm.
PAGE 2
Symbol Parameter Rating Units TOTAL PACKAGE TSTG Storage Temperature -55 to +150 °C TOPR Operating Temperature -40 to +100 °C EMITTER IF (avg) Continuous Forward Current 60 mA IF (pk) Peak Forward Current (1µs pulse, 300pps.) 1 A VR Reverse Input Voltage 6 V PD Power Dissipation (No derating required over operating temp.
PAGE 3
Individual Component Characteristics Symbol Parameter Test Conditions Min. Typ.* Max. Units EMITTER VF Input Forward Voltage IF = 30mA 1.5 V IR Reverse Leakage Current VR = 6V 100 µA 500 nA DETECTOR IDRM1 Peak Blocking Current, Either Direction Rated VDRM, IF = 0(1) dV/dt Critical Rate of Rise of Off-State Voltage IF = 0 (Figure 1)(2) 600 V/µs Transfer Characteristics Symbol DC Characteristics IFT LED Trigger Current Test Conditions Device Main Terminal Voltage = 3V(3) Min.
PAGE 4
Fig. 1 LED Forward Voltage vs. Forward Current Fig. 2 Leakage Current vs. Ambient Temperature 1000 1.8 VDRM = 600V 1.7 IDRM - LEAKAGE CURRENT (nA) VF - FORWARD VOLTAGE (V) 1.6 1.5 1.4 TA = -40°C 1.3 1.2 TA = 25°C 1.1 100 10 1 TA = 100°C 1.0 0.1 -40 0.9 1 10 100 -20 IF - FORWARD CURRENT (mA) Fig. 3 Holding Current vs. Ambient Temperature 20 60 80 100 Fig. 4 Trigger Current vs.
PAGE 5
Fig. 5 LED Current Required to Trigger vs. LED Pulse Width Fig. 6 Off-State Output Terminal Voltage vs. Ambient Temperature 1.4 TA =T25°C A NORMALIZED TO PW IN >> 100µs 10 8 6 4 2 NORMALIZED TO TA = 25°C 1.3 1.2 (NORMALIZED) V DRM- OFF-STATE OUTPUT TERMINAL VOLTAGE IFT - LED TRIGGER CURRENT (NORMALIZED) 12 1.1 1.0 0.9 0.8 0.7 0.6 -40 0 1 10 0 -20 100 20 40 60 80 100 T A - AMBIENT TEMPERATURE (°C) PW IN - LED TRIGGER PULSE WIDTH (°C) Fig.
PAGE 6
RTEST 800V (FODM3082) Vdc (FODM3083) 600V (FODM3062) (FODM3063) 1. The mercury wetted relay provides a high speed repeated pulse to the D.U.T. 2. 100x scope probes are used, to allow high speeds and voltages. 3. The worst-case condition for static dv/dt is established by triggering the D.U.T. with a normal LED input current, then removing the current. The variable RTEST allows the dv/dt to be gradually increased until the D.U.T.
PAGE 7
The power dissipated from resistors placed in series with the opto-TRIAC and the gate of the power TRIAC is much smaller than one would expect. These current handling components only conduct current when the mains voltage is less than the maximum inhibit voltage. If the opto-TRIAC is triggered when the mains voltage is greater than the inhibit voltage, only the TRIAC leakage current will flow.
PAGE 8
Power in the 360Ω resistor, when driving a sensitive gate 4 quadrant power TRIAC: IGT = 20mA VGT = 1.5V DF = 0.6% P = (IGT +VGT / 330Ω)2 x 360Ω x DF P = (20mA + 1.5 / 330Ω)2 *x 360Ω x 0.6% = 1.3mW A 1/4 watt resistor is more than adequate for both the 360Ω and 330Ω resistors. ©2006 Fairchild Semiconductor Corporation FODM3062, FODM3063, FODM3082, FODM3083 Rev. 1.0.9 www.fairchildsemi.
PAGE 9
Option Description No option Bulk (100 units/tube) V VDE Approved R2 Tape and Reel (2500 units) R2V Tape and Reel (2500 units) and VDE Approved Marking Information 1 3063 2 V X YY R 6 3 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 One digit year code 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code ©2006 Fairchild Semiconductor Corporation FODM3062, FODM3063, F
PAGE 10
K0 P2 P0 t D0 E A0 W1 W B0 d F D1 P 2.54 Pitch Description Symbol Dimensions Tape Width W 12.00±0.4 Tape Thickness t 0.35±0.02 Sprocket Hole Pitch P0 4.00±0.20 Sprocket Hole Dia. D0 1.55±0.20 Sprocket Hole Location E 1.75±0.20 Pocket Location F 5.50±0.20 P2 2.00±0.20 Pocket Pitch P 8.00±0.20 Pocket Dimension A0 4.75±0.20 B0 7.30±0.20 Pocket Hole Dia. K0 2.30±0.20 D1 1.55±0.20 Cover Tape Width W1 Cover Tape Thickness d Max.
PAGE 11
FODM3062, FODM3063, FODM3082, FODM3083 — 4-Pin Full Pitch Mini-Flat Package Zero-Cross Triac Driver Output Optocouplers Footprint Drawing for PCB Layout 0.80 1.00 6.50 2.54 Note: All dimensions are in mm. ©2006 Fairchild Semiconductor Corporation FODM3062, FODM3063, FODM3082, FODM3083 Rev. 1.0.9 www.fairchildsemi.
PAGE 12
FODM3062, FODM3063, FODM3082, FODM3083 — 4-Pin Full Pitch Mini-Flat Package Zero-Cross Triac Driver Output Optocouplers Reflow Profile Temperature (°C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3°C/S Max. Ramp-down Rate = 6°C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25°C to Peak Time (seconds) Profile Feature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150°C Temperature Max.
PAGE 13
AccuPower™ Auto-SPM™ Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ DEUXPEED® Dual Cool™ EcoSPARK® n EfficientMax™ ESBC™ ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FETBench™ FlashWriter®* FPS™ F-PFS™ FRFET® SM Global Power Resource Green FPS™ Green FPS™ e-Series™ Gmax™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MicroPak2™ MillerDrive™ MotionMax™ Motion-SPM™ OptoHiT™ OPTOLOGIC® OPTOPLANAR® ® PDP SPM™ Power-SPM™