Datasheet

©2003 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com
FSAM10SH60A Rev. C8
FSAM10SH60A Motion SPM® 2 Series
January 2014
FSAM10SH60A
Motion SPM
®
2 Series
Features
UL Certified No. E209204 (UL1557)
600 V - 10 A 3-Phase IGBT Inverter with Integral
Gate Drivers and Protection
Low-Loss, Short-Circuit Rated IGBTs
Low Thermal Resistance Using Ceramic
Substrate
Separate Open-Emitter Pins from Low Side IGBTs
for Three-Phase Current Sensing
Single-Grounded Power Supply
Optimized for 15 kHz Switching Frequency
Built-in NTC Thermistor for Temperature
Monitoring
Inverter Power Rating of 0.5 kW / 100~253 VAC
Adjustable Current Protection Level via Selection
of Sense-IGBT Emitter's External Rs
Isolation Rating: 2500 V
rms
/ min.
Applications
Motion Control - Home Appliance / Industrial Motor
Resource
AN-9043 - Motion SPM® 2 Series User's Guide
General Description
FSAM10SH60A is a Motion SPM
®
2 module
providing a fully-featured, high-performance inverter
stage for AC Induction, BLDC, and PMSM motors.
These modules integrate optimized gate drive of
the built-in IGBTs to minimize EMI and losses, while
also providing multiple on-module protection
features including under-voltage lockouts, over-
current shutdown, thermal monitoring, and fault
reporting. The built-in, high-speed HVIC requires
only a single supply voltage and translates the
incoming logic-level gate inputs to the high-voltage,
high-current drive signals required to properly drive
the module's internal IGBTs. Separate negative
IGBT terminals are available for each phase to
support the widest variety of control algorithms.
Package Marking and Ordering Information
Device Device Marking Package Packing Type Quantity
FSAM10SH60A FSAM10SH60A S32AA-032 Rail 8
Figure 1. Package Overview

Summary of content (15 pages)