Datasheet
© 2000 Fairchild Semiconductor Corporation DS500046 www.fairchildsemi.com
September 1997
Revised November 2000
FST3384 10-Bit Low Power Bus Switch
FST3384
10-Bit Low Power Bus Switch
General Description
The Fairchild Switch FST3384 provides 10 bits of high-
speed CMOS TTL-compatible bus switches. The low on
resistance of the switch allows inputs to be connected to
outputs without adding propagation delay or generating
additional ground bounce noise. The device is organized
as two 5-bit switches with separate bus enable (OE
) sig-
nals. When OE
is LOW, the switch is ON and Port A is con-
nected to Port B. When OE
is HIGH, the switch is OPEN
and a high-impedance state exists between the two ports.
Features
■ 4Ω switch connection between two ports
■ Minimal propagation delay through the switch
■ Ultra low power with
< 0.1 µA typical I
CC
■ Zero ground bounce in flow-through mode
■ Control inputs compatible with TTL level
Ordering Code:
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Diagram
Pin Descriptions
Connection Diagram
Truth Table
Order Number Package Number Package Description
FST3384WM M24B 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
FST3384QSC MQA24 24-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 Wide
FST3384MTC MTC24 24-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Pin Names Description
OE
1
, OE
2
Bus Switch Enable
A
0
–A
9
Bus A
B
0
–B
9
Bus B
OE
1
OE
2
B
0
–B
4
B
5
–B
9
Function
LLA
0
–A
4
A
5
–A
9
Connect
LHA
0
–A
4
HIGH-Z State Connect
H L HIGH-Z State A
5
–A
9
Connect
H H HIGH-Z State HIGH-Z State Disconnect