Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsOptoelectronics & DisplaysDIP-6

H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler

H11L1M, H11L2M, H11L3M Rev. 1.0.6

January 2014

H11L1M, H11L2M, H11L3M

6-Pin DIP Optocoupler

Features

■

High Data Rate, 1 MHz Typical (NRZ)

■

Free from Latch-up and Oscilliation Throughout

Voltage and Temperature Ranges

■

Microprocessor Compatible Drive

■

Logic Compatible Output Sinks 16 mA at 0.4 V

Maximum

■

Guaranteed On/Off Threshold Hysteresis

■

Wide Supply Voltage Capability, Compatible with All

Popular Logic Systems

■

Underwriters Laboratory (UL) Recognized —

File #E90700, Volume 2

■

VDE Recognized – File #102497 – Add Option V

(e.g., H11LIVM)

Applications

■

Logic-to-Logic Isolator

■

Programmable Current Level Sensor

■

Line Receiver—Eliminate Noise and Transient

Problems

■

AC to TTL Conversion—Square Wave Shaping

■

Digital Programming of Power Supplies

■

Interfaces Computers with Peripherals

Description

The H11LXM series has a high-speed integrated circuit

detector optically coupled to a gallium-arsenide infrared

emitting diode. The output incorporates a Schmitt trigger,

which provides hysteresis for noise immunity and pulse

shaping. The detector circuit is optimized for simplicity of

operation and utilizes an open-collector output for

maximum application flexibility.

Schematic Package Outlines

5 GND

ANODE

CATHODE

Truth Table

Input Output

Figure 1. Schematic

Figure 2. Package Outlines

Summary of content (12 pages)

PAGE 1
H11L1M, H11L2M, H11L3M 6-Pin DIP Optocoupler Features Description ■ High Data Rate, 1 MHz Typical (NRZ) The H11LXM series has a high-speed integrated circuit detector optically coupled to a gallium-arsenide infrared emitting diode. The output incorporates a Schmitt trigger, which provides hysteresis for noise immunity and pulse shaping. The detector circuit is optimized for simplicity of operation and utilizes an open-collector output for maximum application flexibility.
PAGE 2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = 25°C unless otherwise specified.
PAGE 3
Individual Component Characteristics Symbol Parameters Test Conditions Device Min. Typ. Max. Units 1.2 1.5 V Emitter VF Input Forward Voltage IF = 10 mA All IF = 0.3 mA 0.75 1.0 IR Reverse Current VR = 3 V All 10 µA CJ Capacitance V = 0, f = 1.0 MHz All 100 pF 15 V 5.0 mA 100 µA Detector VCC ICC(off) IOH Operating Voltage Range All Supply Current IF = 0, VCC = 5 V All Output Current, High IF = 0, VCC = VO = 15 V All Test Conditions Device 3 1.
PAGE 4
As per IEC 60747-5-2, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings is ensured by means of protective circuits. Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 0110/1.89 see Table 1 For Rated Main Voltage < 150 Vrms I-IV For Rated Main Voltage < 300 Vrms I-IV Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.
PAGE 5
VCC = 5 V RL = 270 Ω TA = 25°C V OH 5 VO – OUTPUT VOLTAGE (V) IF – THRESHOLD CURRENT (NORMALIZED) 6 4 I F(OFF) I F(ON) 3 2 1 V OL 0 0 1 2 1.6 IF NORMALIZED TO: IF(ON) AT VCC = 5 V 1.4 TA = 25oC 1.2 TURN ON THRESHOLD 1.0 TURN OFF THRESHOLD 0.8 0.6 0.4 0 3 2 6 8 10 12 14 16 Figure 4. Threshold Current vs. Supply Voltage 1.6 2 VOL - OUTPUT VOLTAGE, LOW (V) IF(On) , IF(Off) – THRESHOLD CURRENT (NORMALIZED) Figure 3. Transfer Characteristics 1.4 1.2 1.0 0.
PAGE 6
C I6 IF 1 H11L1 RE 6 RL 50% 0 270Ω 4 VIN VIN 5V 5V VO toff ton tr = tf ≤ 0.01 μS Z = 50 Ω 5 2 0.1μF 10% VO 90% tf tr Figure 9. Switching Test Circuit and Waveforms Reflow Profile 300 260°C 280 260 >245°C = 42 Sec 240 220 200 180 °C Time above 183°C = 90 Sec 160 140 120 1.822°C/Sec Ramp up rate 100 80 60 40 33 Sec 20 0 0 60 120 180 270 360 Time (s) Figure 10. Reflow Profile ©2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.6 www.fairchildsemi.
PAGE 7
Option Order Entry Identifier (Example) No option H11L1M S H11L1SM SR2 H11L1SR2M T H11L1TM 0.4" Lead Spacing V H11L1VM VDE 0884 TV H11L1TVM VDE 0884, 0.
PAGE 8
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler Package Dimensions Figure 11. 6-pin DIP Through Hole Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 9
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler Package Dimensions (Continued) Figure 12. 6-pin DIP Surface Mount Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 10
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler Package Dimensions (Continued) Figure 13. 6-pin DIP 0.4” Lead Spacing Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 11
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler Tape Dimensions 12.0 ± 0.1 4.5 ± 0.20 2.0 ± 0.05 0.30 ± 0.05 4.0 ± 0.1 Ø1.5 MIN 1.75 ± 0.10 11.5 ± 1.0 21.0 ± 0.1 9.1 ± 0.20 0.1 MAX 24.0 ± 0.3 Ø1.5 ± 0.1/-0 10.1 ± 0.20 User Direction of Feed Note: All dimensions are in millimeters. Figure 14. Tape Dimensions ©2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.6 www.fairchildsemi.
PAGE 12
H11L1M, H11L2M, H11L3M — 6-Pin DIP Optocoupler ©2005 Fairchild Semiconductor Corporation H11L1M, H11L2M, H11L3M Rev. 1.0.6 www.fairchildsemi.