Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsFETsJ176_D74Z, MOSFET

NOTE: Source & Drain

are interchangeable

J174

J175

J176

J177

MMBFJ175

MMBFJ176

MMBFJ177

P-Channel Switch

This device is designed for low level analog switching sample and hold

circuits and chopper stabilized amplifiers. Sourced from Process 88.

SOT-23

Mark: 6W / 6X / 6Y

TO-92

Absolute Maximum Ratings* TA = 25°C unless otherwise noted

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

NOTES:

1) These ratings are based on a maximum junction temperature of 150 degrees C.

2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

Thermal Characteristics TA = 25°C unless otherwise noted

Symbol Characteristic Max Units

J174 -177 *MMBFJ175-177

Total Device Dissipation

Derate above 25

350

2.8

225

1.8

mW/

Thermal Resistance, Junction to Case 125

C/W

Thermal Resistance, Junction to Ambient 357 556

C/W

Symbol Parameter Value Units

Drain-Gate Voltage - 30 V

Gate-Source Voltage 30 V

Forward Gate Current 50 mA

stg

Operating and Storage Junction Temperature Range -55 to +150

*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."

1997 Fairchild Semiconductor Corporation

J174 / J175 / J176 / J177 / MMBFJ175 / 176 / 177

Summary of content (12 pages)

PAGE 1
J174 / J175 / J176 / J177 / MMBFJ175 / 176 / 177 MMBFJ175 MMBFJ176 MMBFJ177 J174 J175 J176 J177 G S S G TO-92 D SOT-23 D Mark: 6W / 6X / 6Y NOTE: Source & Drain are interchangeable P-Channel Switch This device is designed for low level analog switching sample and hold circuits and chopper stabilized amplifiers. Sourced from Process 88.
PAGE 2
(continued) Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter Test Conditions Min Max Units 1.0 nA OFF CHARACTERISTICS B(BR)GSS Gate-Source Breakdown Voltage IG = 1.0 µA, VDS = 0 IGSS Gate Reverse Current VGS = 20 V, VDS = 0 VGS(off) Gate-Source Cutoff Voltage VDS = - 15 V, ID = - 10 nA 174 175 176 177 5.0 3.0 1.0 0.8 10 6.0 4.0 2.5 V V V V 174 175 176 177 174 175 176 177 - 20 - 7.0 - 2.0 - 1.
PAGE 3
(continued) Typical Characteristics (continued) Transfer Characteristics Transfer Characteristics V GS(off) = - 4.5 V -24 - 55°C 25°C 125°C VGS(off) = 2.5 V -16 - 55°C 25°C 125°C 1 2 3 VGS - GATE-SOURCE VOLTAGE (V) 8 - 55°C 25°C 125°C 4 50 20 10 0 4 r DS r DS = V GS 1 -________ V GS(off) 5 2 1 0 0.2 0.4 0.6 0.8 1 VGS /VGS(off) - NORMALIZED GATE-SOURCE VOLTAGE (V) 1 2 3 VGS - GATE-SOURCE VOLTAGE (V) 4 Output Conductance vs Drain Current V GS(off) = 2.5V 25°C V GS(off) = 6.
PAGE 4
(continued) Typical Characteristics (continued) Noise Voltage vs Frequency r DS - DRAIN "ON" RESISTANCE (Ω) 50 I D = - 0.2 mA 10 I D = 5.0 mA 5 V DG = - 15V BW = 6.0 Hz @ f = 10 Hz, 100 Hz = 0.2f @ f ≥ 1.0 kHz 1 0.01 0.1 1 10 f - FREQUENCY (kHz) Channel Resistance vs Temperature 1000 100 500 V DS = -100 mV V GS(off) = 2.5V V GS(off) = 8.0V 100 50 10 -50 0 50 100 150 T A - AMBIENT TEMPERATURE ( o C) 350 300 TO-92 250 200 150 SOT-23 100 50 0 0 25 V GS = 0 V GS(off) = 4.
PAGE 5
TO-92 Tape and Reel Data TO-92 Packaging Configuration: Figure 1.0 TAPE and REEL OPTION FSCINT Label sample See Fig 2.
PAGE 6
TO-92 Tape and Reel Data, continued TO-92 Reeling Style Configuration: Figure 2.0 Machine Option “A” (H) Machine Option “E” (J) Style “A”, D26Z, D70Z (s/h) Style “E”, D27Z, D71Z (s/h) TO-92 Radial Ammo Packaging Configuration: Figure 3.0 FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP ORDER STYLE D74Z (M) FIRST WIRE OFF IS EMITTER (ON PKG.
PAGE 7
TO-92 Tape and Reel Data, continued TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0 Hd P Pd b Ha W1 d L H1 HO L1 S WO t W2 W t1 P1 F1 DO P2 PO User Direction of Feed TO-92 Reel Configuration: Figure 5.0 ITEM DESCRIPTION SYMBOL DIMENSION Base of Package to Lead Bend b 0.098 (max) Component Height Ha 0.928 (+/- 0.025) Lead Clinch Height HO 0.630 (+/- 0.020) Component Base Height H1 0.748 (+/- 0.020) Component Alignment ( side/side ) Pd 0.
PAGE 8
TO-92 Package Dimensions TO-92 (FS PKG Code 92, 94, 96) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.1977 ©2000 Fairchild Semiconductor International January 2000, Rev.
PAGE 9
SOT-23 Tape and Reel Data SOT-23 Packaging Configuration: Figure 1.0 Customized Label Packaging Description: SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel.
PAGE 10
SOT-23 Tape and Reel Data, continued SOT-23 Embossed Carrier Tape Configuration: Figure 3.0 P0 P2 D1 D0 T E1 W F E2 Wc B0 Tc A0 P1 K0 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 SOT-23 (8mm) 3.15 +/-0.10 2.77 +/-0.10 W 8.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.125 +/-0.125 1.75 +/-0.10 F 6.25 min 3.50 +/-0.05 P1 P0 4.0 +/-0.1 4.0 +/-0.1 K0 T 1.30 +/-0.10 0.228 +/-0.
PAGE 11
SOT-23 Package Dimensions SOT-23 (FS PKG Code 49) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0082 ©2000 Fairchild Semiconductor International September 1998, Rev.
PAGE 12
TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.