Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsFETsMMBF4392, MOSFET

PN4391

PN4392

PN4393

MMBF4391

MMBF4392

MMBF4393

N-Channel Switch

This device is designed for low level analog switching, sample

and hold circuits and chopper stabalized amplifiers. Sourced

from Process 51. See J111 for characteristics.

Absolute Maximum Ratings* TA = 25°C unless otherwise noted

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

NOTES:

1) These ratings are based on a maximum junction temperature of 150 degrees C.

2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations

Thermal Characteristics TA = 25°C unless otherwise noted

Symbol Parameter Value Units

Drain-Gate Voltage 30 V

Gate-Source Voltage - 30 V

Forward Gate Current 50 mA

stg

Operating and Storage Junction Temperature Range -55 to +150

TO-92

SOT-23

Mark: 6J / 6K / 6G

*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."

1997 Fairchild Semiconductor Corporation

NOTE: Source & Drain

are interchangeable

PN4391 / 4392 / 4393 / MMBF4391 / 4392 / 4393

Symbol Characteristic Max Units

PN4391-4393 *MMBF4391-4393

Total Device Dissipation

Derate above 25

625

5.0

350

2.8

mW/

Thermal Resistance, Junction to Case 125

C/W

Thermal Resistance, Junction to Ambient 357 556

C/W

Summary of content (10 pages)

PAGE 1
PN4391 / 4392 / 4393 / MMBF4391 / 4392 / 4393 MMBF4391 MMBF4392 MMBF4393 PN4391 PN4392 PN4393 G S G S TO-92 SOT-23 D D Mark: 6J / 6K / 6G NOTE: Source & Drain are interchangeable N-Channel Switch This device is designed for low level analog switching, sample and hold circuits and chopper stabalized amplifiers. Sourced from Process 51. See J111 for characteristics.
PAGE 2
(continued) Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter Test Conditions Min Max Units - 1.0 - 0.2 - 10 - 5.0 - 3.0 1.0 nA µA V V V V OFF CHARACTERISTICS V(BR)GSS Gate-Source Breakdown Voltage IG = 1.0 µA, VDS = 0 IGSS Gate Reverse Current VGS(off) Gate-Source Cutoff Voltage VGS(f) Gate-Source Forward Voltage VGS = - 15 V, VDS = 0 VGS = - 15 V, VDS = 0, TA = 150°C 4391 VDS = 20 V, ID = 1.0 nA 4392 4393 IG = 1.
PAGE 3
TO-92 Tape and Reel Data TO-92 Packaging Configuration: Figure 1.0 TAPE and REEL OPTION FSCINT Label sample See Fig 2.
PAGE 4
TO-92 Tape and Reel Data, continued TO-92 Reeling Style Configuration: Figure 2.0 Machine Option “A” (H) Machine Option “E” (J) Style “A”, D26Z, D70Z (s/h) Style “E”, D27Z, D71Z (s/h) TO-92 Radial Ammo Packaging Configuration: Figure 3.0 FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP ORDER STYLE D74Z (M) FIRST WIRE OFF IS EMITTER (ON PKG.
PAGE 5
TO-92 Tape and Reel Data, continued TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0 Hd P Pd b Ha W1 d L H1 HO L1 S WO t W2 W t1 P1 F1 DO P2 PO User Direction of Feed TO-92 Reel Configuration: Figure 5.0 ITEM DESCRIPTION SYMBOL DIMENSION Base of Package to Lead Bend b 0.098 (max) Component Height Ha 0.928 (+/- 0.025) Lead Clinch Height HO 0.630 (+/- 0.020) Component Base Height H1 0.748 (+/- 0.020) Component Alignment ( side/side ) Pd 0.
PAGE 6
TO-92 Package Dimensions TO-92 (FS PKG Code 92, 94, 96) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.1977 ©2000 Fairchild Semiconductor International January 2000, Rev.
PAGE 7
SOT-23 Tape and Reel Data SOT-23 Packaging Configuration: Figure 1.0 Customized Label Packaging Description: SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel.
PAGE 8
SOT-23 Tape and Reel Data, continued SOT-23 Embossed Carrier Tape Configuration: Figure 3.0 P0 P2 D1 D0 T E1 W F E2 Wc B0 Tc A0 P1 K0 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 SOT-23 (8mm) 3.15 +/-0.10 2.77 +/-0.10 W 8.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.125 +/-0.125 1.75 +/-0.10 F 6.25 min 3.50 +/-0.05 P1 P0 4.0 +/-0.1 4.0 +/-0.1 K0 T 1.30 +/-0.10 0.228 +/-0.
PAGE 9
SOT-23 Package Dimensions SOT-23 (FS PKG Code 49) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0082 ©2000 Fairchild Semiconductor International September 1998, Rev.
PAGE 10
TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.