Datasheet

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
MOC306XM, MOC316XM Rev. 1.0.4 2
MOC306XM, MOC316XM — 6-Pin DIP Zero-Cross Phototriac Driver Optocoupler (600 Volt Peak)
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise noted)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Note:
1. Isolation surge voltage, V
ISO
, is an internal device dielectric breakdown rating. For this test, Pins 1 and 2 are
common, and Pins 4, 5 and 6 are common.
Symbol Parameters Device Value Units
TOTAL DEVICE
T
STG
Storage Temperature All -40 to +150 °C
T
OPR
Operating Temperature All -40 to +85 °C
T
SOL
Lead Solder Temperature All 260 for 10 sec °C
T
J
Junction Temperature Range All -40 to +100 °C
V
ISO
Isolation Surge Voltage
(1)
(peak AC voltage, 60Hz, 1 sec. duration)
All 7500 Vac(pk)
P
D
Total Device Power Dissipation @ 25°C Ambient
Derate above 25°C
All 250 mW
2.94 mW/°C
EMITTER
I
F
Continuous Forward Current All 60 mA
V
R
Reverse Voltage All 6 V
P
D
Total Power Dissipation @ 25°C Ambient
Derate above 25°C
All 120 mW
1.41 mW/°C
DETECTOR
V
DRM
Off-State Output Terminal Voltage All 600 V
I
TSM
Peak Repetitive Surge Current
(PW = 100µs, 120pps)
All 1 A
P
D
Total Power Dissipation @ 25°C Ambient
Derate above 25°C
All 150 mW
1.76 mW/°C