Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsLogic ICsLogic IC - Inverter Inverter 7NZ US 8

August 2010

NC7NZ04 • Rev. 1.0.2

NC7NZ04 — TinyLogic

UHS Inverter

NC7NZ04

TinyLogic

UHS Inverter

Features

 Ultra-High Speed: t

2.4ns (Typical) into 50pF at

5V V

 High Output Drive: ±24mA at 3V V

 Broad V

Operating Range: 1.65V to 5.5V

 Power-Down, High-Impedance Inputs / Outputs

 Over-Voltage Tolerance Inputs Facilitate 5V to 3V

Translation

 Proprietary Noise / EMI Reduction Circuitry

 Space-Saving MicroPak™ and US8 Surface Mount

Packages

Description

The NC7NZ04 is a triple inverter from Fairchild’s Ultra-

High Speed (UHS) series of TinyLogic®. The device is

fabricated with advanced CMOS technology to achieve

ultra-high speed with high output drive while maintaining

low static power dissipation over a broad V

operating

range. The device is specified to operate over the 1.65V

to 5.5V V

operating range. The inputs and output are

high impedance when V

is 0V. Inputs tolerate

voltages up to 7V, independent of V

operating

voltage.

IEEC/IEC

Figure 1. Logic Symbol

Figure 2. Connection Diagram

Ordering Information

Part Number Top Mark Package Packing Method

NC7NZ04K8X NZ04 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide

3000 Units on

Tape & Reel

NC7NZ04L8X T3 8-Lead MicroPak™, 1.6mm Wide

5000 Units on

Tape & Reel

MicroPak™ is a trademarks of Fairchild Semiconductor Corporation.

Summary of content (8 pages)

PAGE 1
NC7NZ04 TinyLogic® UHS Inverter Features Description Ultra-High Speed: tPD 2.4ns (Typical) into 50pF at 5V VCC High Output Drive: ±24mA at 3V VCC The NC7NZ04 is a triple inverter from Fairchild’s UltraHigh Speed (UHS) series of TinyLogic®. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65V to 5.
PAGE 2
Figure 3. US8 Notes: 1. AAA represents product code top mark (see ordering table). 2. Orientation of top mark determines pin one location. Reading the top product code mark left to right, pin one is the lower left pin. NC7NZ04 — TinyLogic® UHS Inverter Pin Configurations Figure 4.
PAGE 3
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VIN VOUT Parameter Min. Max. Unit Supply Voltage -0.5 7.0 V DC Input Voltage -0.5 7.
PAGE 4
Symbol Parameter VIH HIGH Level Input Voltage VIL LOW Level Input Voltage VCC TA=25°C Conditions Min. 0.75VCC 2.30 to 5.50 0.70VCC 0.70VCC 0.25VCC 2.30 to 5.50 0.30VCC 0.30VCC VIN=VIL, IOH=-100µA 4.50 HIGH Level Output Voltage ICC Quiescent Supply Current 2.20 3.00 2.90 4.50 4.40 1.52 1.29 2.30 IOH=-8mA 1.90 2.15 1.90 3.00 IOH=-16mA 2.40 2.80 2.40 3.00 IOH=-24mA 2.30 2.68 2.30 4.50 IOH=-32mA 3.80 4.20 VIN=VIH, IOL=100µA V V 3.80 0.00 0.10 0.10 0.00 0.
PAGE 5
Symbol Parameter VCC TA=25°C Conditions 1.80 ± 0.15 2.50 ± 0.20 tPLH, tPHL Propagation Delay 3.30 ± 0.30 5.00 ± 0.50 3.30 ± 0.30 5.00 ± 0.50 CIN CPD CL=15pF, RL=1MΩ CL=50pF, RL=500Ω TA=-40 to 85°C Min. Typ. Max. Min. Max. 1.8 4.4 9.5 2.0 10.0 0.8 2.9 5.1 0.8 5.6 0.5 2.1 3.4 0.5 3.8 0.5 1.8 2.8 0.5 3.1 1.2 2.9 4.5 1.2 5.0 0.8 2.4 3.6 0.8 4.0 Input Capacitance 0 2.5 Power Dissipation Capacitance(4) 3.30 9 5.
PAGE 6
NC7NZ04 — TinyLogic® UHS Inverter Physical Dimensions 2.10 1.90 0.15 A 1.80 B 5 8 (8X) 0.70 3.20 3.00 2.40 2.20 2.70 3.40 1.00 1.55 1 PIN 1 IDENT 4 0.2 C B A ALL LEAD TIPS 0.50 TOP VIEW 0.30 (8X) RECOMMENDED LAND PATTERN 0.80 0.60 0.90 MAX 0.10 0.00 ALL LEAD TIPS 0.1 C A. CONFORMS TO JEDEC REGISTRATION MO-187 B. DIMENSIONS ARE IN MILLIMETERS. SEATING PLANE C C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS. 0.17-0.27 (8X) 0.50 0.13 A B C D.
PAGE 7
NC7NZ04 — TinyLogic® UHS Inverter Physical Dimensions 0.10 2X C A 1.6 B 1.6 INDEX AREA 0.10 2X C TOP VIEW 0.55 MAX 0.05 0.05 0.00 DETAIL A 8X(0.09) C 8X Recommended Landpattern 0.05 C (0.20) 1.0 2 1 4 (0.1) C 8 4 7 0.35 0.25 3X(0.2) 0.35 0.25 0.5 3 6 5 (0.15) 0.15 8X 0.25 0.35 0.25 0.10 0.05 DETAIL A PIN #1 TERMINAL SCALE: 2X C A B C BOTTOM VIEW Notes: 1. PACKAGE CONFORMS TO JEDEC MO-255 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y.
PAGE 8
NC7NZ04 — TinyLogic® UHS Inverter © 2001 Fairchild Semiconductor Corporation NC7NZ04 • Rev. 1.0.2 www.fairchildsemi.