Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsLogic ICsLogic IC - Inverter Inverter 7SZ SC 70 5

February 2011

NC7SZ04 • Rev. 1.0.5

NC7SZ04 — TinyLogic

UHS Inverter

NC7SZ04

TinyLogic

UHS Inverter

Features

 Ultra-High Speed: t

2.4ns (Typical) into 50pF at

5V V

 High Output Drive: ±24mA at 3V V

 Broad V

Operating Range: 1.65V to 5.5V

 Matches Performance of LCX when Operated at

3.3V V

 Power Down High Impedance Inputs/Outputs

 Over-Voltage Tolerance Inputs Facilitate 5V to 3V

Translation

 Proprietary Noise/EMI Reduction Circuitry

 Ultra-Small MicroPak™ Packages

 Space-Saving SOT23 and SC70 Packages

Description

The NC7SZ04 is a single inverter from Fairchild’s Ultra-

High Speed (UHS) series of TinyLogic®. The device is

fabricated with advanced CMOS technology to achieve

ultra-high speed with high output drive while maintaining

low static power dissipation over a broad V

operating

range. The device is specified to operate over the 1.65V

to 5.5V V

operating range. The inputs and output are

high-impedance when V

is 0V. Inputs tolerate

voltages up to 6V, independent of V

operating voltage.

Related Resources

 MS-503 — Family Characteristics TinyLogic

HS/HST and UHS Series

Ordering Information

Part Number Top Mark Package Packing Method

NC7SZ04M5X 7Z04 5-Lead SOT23, JEDEC MO-178 1.6mm 3000 Units on Tape & Reel

NC7SZ04P5X Z04 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3000 Units on Tape & Reel

NC7SZ04L6X CC 6-Lead MicroPak™, 1.00mm Wide 5000 Units on Tape & Reel

NC7SZ04FHX CC 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch 5000 Units on Tape & Reel

Summary of content (10 pages)

PAGE 1
NC7SZ04 TinyLogic® UHS Inverter Features Description  Ultra-High Speed: tPD 2.4ns (Typical) into 50pF at 5V VCC    High Output Drive: ±24mA at 3V VCC   Power Down High Impedance Inputs/Outputs The NC7SZ04 is a single inverter from Fairchild’s UltraHigh Speed (UHS) series of TinyLogic®. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range.
PAGE 2
NC7SZ04 — TinyLogic® UHS Inverter Connection Diagrams IEEC/IEC Figure 1. Logic Symbol Pin Configurations Figure 2. SC70 and SOT23 (Top View) Figure 3.
PAGE 3
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC Supply Voltage -0.5 6.0 V VIN DC Input Voltage -0.5 6.0 V 6.
PAGE 4
Symbol Parameter VIH HIGH Level Input Voltage VIL LOW Level Input Voltage VCC IIN Typ. Max. Min. 1.65 to 1.95 0.75VCC 0.75VCC 0.70VCC 0.70VCC V 0.25VCC 0.25VCC 2.30 to 5.50 0.30VCC 0.30VCC 1.65 1.55 1.65 1.80 1.70 1.80 1.70 2.20 2.30 2.20 3.00 2.90 3.00 2.90 4.50 4.40 4.50 HIGH Level Output Voltage 4.40 LOW Level Output Voltage Input Leakage Current 1.65 IOH=-4mA 1.29 1.52 1.29 2.30 IOH=-8mA 1.90 2.15 1.90 3.00 IOH=-16mA 2.40 2.80 2.40 3.
PAGE 5
Symbol Parameter VCC Propagation Delay CPD Typ. Max. Min. 2.0 5.3 11.4 2.0 12.0 2.0 4.4 9.5 2.0 10.0 CL=15pF, RL=1M 0.8 2.9 6.5 0.8 7.0 3.30 ± 0.30 0.5 2.1 4.5 0.5 4.7 5.00 ± 0.50 0.5 1.8 3.9 0.5 4.1 3.30 ± 0.30 1.5 2.9 5.0 1.5 5.2 0.8 2.4 4.3 0.8 4.5 CL=50pF, RL=500 Input Capacitance 0.00 4 Power Dissipation (2) Capacitance 3.30 20 5.00 26 Units Figure ns Figure 4 Figure 5 Max. 1.65 5.00 ± 0.50 CIN Min. TA=-40 to 85°C 1.80 2.50 ± 0.
PAGE 6
NC7SZ04 — TinyLogic® UHS Inverter Physical Dimensions 3.00 2.80 5 SYMM CL 0.95 0.95 A 4 B 3.00 2.60 1.70 1.50 1 2 2.60 3 (0.30) 1.00 0.50 0.30 0.95 0.20 1.90 C A B 0.70 TOP VIEW LAND PATTERN RECOMMENDATION SEE DETAIL A 1.30 0.90 1.45 MAX 0.15 0.05 0.22 0.08 C 0.10 C NOTES: UNLESS OTHEWISE SPECIFIED GAGE PLANE A) THIS PACKAGE CONFORMS TO JEDEC MO-178, ISSUE B, VARIATION AA, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) MA05Brev5 0.25 8° 0° 0.55 0.35 SEATING PLANE 0.60 REF Figure 7.
PAGE 7
NC7SZ04 — TinyLogic® UHS Inverter Physical Dimensions Figure 8. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 8
NC7SZ04 — TinyLogic® UHS Inverter Physical Dimensions 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.254) (0.49) 5X 1.00 (0.75) PIN 1 IDENTIFIER 5 (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 0.25 0.15 6X 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X DETAIL A PIN 1 TERMINAL 0.075 X 45 CHAMFER (0.13) 4X BOTTOM VIEW Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2.
PAGE 9
NC7SZ04 — TinyLogic® UHS Inverter Physical Dimensions 0.89 0.35 0.05 C 1.00 2X B A 5X 0.40 PIN 1 MIN 250uM 0.66 1.00 1X 0.45 6X 0.19 0.05 C TOP VIEW RECOMMENDED LAND PATTERN FOR SPACE CONSTRAINED PCB 2X 0.90 0.05 C 0.35 0.55MAX C 5X 0.52 SIDE VIEW 0.73 (0.08) 4X 1 DETAIL A 2 1X 0.57 0.09 0.19 6X 3 0.20 6X ALTERNATIVE LAND PATTERN FOR UNIVERSAL APPLICATION (0.05) 6X 5X 0.35 0.25 6 5 4 0.35 0.60 (0.08) 4X 0.10 .05 C C B A 0.40 0.30 BOTTOM VIEW NOTES: A.
PAGE 10
NC7SZ04 — TinyLogic® UHS Inverter © 1996 Fairchild Semiconductor Corporation NC7SZ04 • Rev. 1.0.5 www.fairchildsemi.