Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsLogic ICsLogic IC - Inverter Inverter 7SZU MicroPak 6

October 2009

NC7SZU04 • Rev. 1.0.2

NC7SZU04 — TinyLogic

UHS Unbuffrered Inverter

NC7SZU04

TinyLogic

UHS Unbuffered Inverter

Features

 Unbuffered for Crystal Oscillator and Analog

Applications

 Balanced Output Drive: ±16mA at 4.5V V

 Broad V

Operating Range: 1.65V to 5.5V

 Matches Performance of LCX Operated at 3.3V V

 Low Quiescent Power: I

<2µA, V

=5.5V,

=25°C

 Ultra-Small MicroPak™ Packages

 Space-Saving SOT23 and SC70 Packages

Description

The NC7SZU04 is a single unbuffered inverter from

Fairchild’s Ultra-High Speed series of TinyLogic®. The

special purpose unbuffered circuit design is primarily

intended for crystal oscillator or analog applications.

The device is fabricated with advanced CMOS

technology to achieve ultra-high speed with high output

drive while maintaining low static power dissipation over

a broad V

operating range. The device is specified to

operate over the 1.65V to 5.5V V

range.

Ordering Information

Part Number Top Mark

Eco

Status

Package Packing Method

NC7SZU04M5X 7ZU4 RoHS 5-Lead SOT23, JEDEC MO-178 1.6mm

3000 Units on

Tape & Reel

NC7SZU04P5X ZU4 RoHS 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide

3000 Units on

Tape & Reel

NC7SZU04L6X C5 RoHS 6-Lead MicroPak™, 1.00mm Wide

5000 Units on

Tape & Reel

NC7SZU04FHX C5 Green 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch

5000 Units on

Tape & Reel

For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.

Summary of content (10 pages)

PAGE 1
NC7SZU04 TinyLogic® UHS Unbuffered Inverter Features Description Unbuffered for Crystal Oscillator and Analog Applications Balanced Output Drive: ±16mA at 4.5V VCC The NC7SZU04 is a single unbuffered inverter from Fairchild’s Ultra-High Speed series of TinyLogic®. The special purpose unbuffered circuit design is primarily intended for crystal oscillator or analog applications.
PAGE 2
IEEE/IEC Figure 1. Logic Symbol Pin Configurations Figure 2. SC70 and SOT23 (Top View) Figure 3.
PAGE 3
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VIN VOUT Parameter Min. Max. Unit Supply Voltage -0.5 6.0 V DC Input Voltage -0.5 6.
PAGE 4
Symbol Parameter VIH HIGH Level Input Voltage VIL LOW Level Input Voltage VCC TA=+25°C Conditions Min. 0.85VCC 3.0 to 5.5 0.80VCC 0.80VCC 0.15VCC 3.0 to 5.5 0.20VCC 0.20VCC 1.65 1.55 1.65 1.55 1.60 1.80 1.60 2.10 2.30 2.10 2.70 3.00 2.70 VIN=VIL, IOH=-100µA 4.50 4.00 4.40 4.00 IOH=-4mA 1.29 1.52 1.29 2.30 IOH=-4mA 1.90 2.14 1.90 3.00 VIN=GND IOH=-8mA 2.40 2.75 2.40 2.30 1.65 3.00 IOH=-12mA 2.30 2.61 4.50 IOH=-16mA 3.80 4.13 1.
PAGE 5
Symbol Parameter VCC TA=+25°C Conditions Min. 1.65 1.80 2.50 ± 0.20 tPLH,tPHL Propagation Delay CL=15pF, RL=1MΩ, 3.30 ± 0.30 Typ. TA=-40 to +85°C Max. Min. Max. 1.0 11.7 1.0 12.1 1.0 8.5 1.0 9.0 0.8 6.2 0.8 6.5 0.5 4.5 0.5 4.8 5.00 ± 0.50 0.5 3.9 0.5 4.1 3.30 ± 0.30 CL=50pF, 5.00 ± 0.50 RL=500Ω, 1.0 6.0 1.0 6.5 5.0 0.8 5.5 0.8 CIN Input Capacitance 0.00 CPD Power Dissipation Capacitance(2) 3.30 6.3 5.00 9.5 Units Figure ns Figure 4 Figure 5 4.
PAGE 6
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter Physical Dimensions 3.00 2.80 5 SYMM CL 0.95 0.95 A 4 B 3.00 2.60 1.70 1.50 1 2 2.60 3 (0.30) 1.00 0.50 0.30 0.95 0.20 1.90 C A B 0.70 TOP VIEW LAND PATTERN RECOMMENDATION SEE DETAIL A 1.30 0.90 1.45 MAX 0.15 0.05 0.22 0.08 C 0.10 C NOTES: UNLESS OTHEWISE SPECIFIED GAGE PLANE A) THIS PACKAGE CONFORMS TO JEDEC MO-178, ISSUE B, VARIATION AA, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) MA05Brev5 0.25 8° 0° 0.55 0.35 0.
PAGE 7
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter Physical Dimensions Figure 8. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 8
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter Physical Dimensions 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.49) 5X 1.00 (0.75) (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X 0.25 0.15 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X BOTTOM VIEW DETAIL A PIN 1 TERMINAL 0.075 X 45 CHAMFER (0.13) 4X Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2.
PAGE 9
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter Physical Dimensions DETAIL A 5X Figure 10. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 10
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter © 1996 Fairchild Semiconductor Corporation NC7SZU04 • Rev. 1.0.2 www.fairchildsemi.