Operation Manual

21
- Press “M” button again after the
last memory, the machine will
power off. Under the memory-
displaying mode, it will be
automatically power off after 2
minutes of none use. Or you can
press “START” button to shut
down the machine.
- If it has no memory, then LCD
will show “0”for systolis, diastolic,
and pulse rate, and show “00”
for the number of memory. While
press the “M” or “START”,
machine will power off.
8. Deletion of Memories
Under the mode of reading
memories, holding on pressing
“MEM” button for three seconds,
all memories will be deleted after
three “beep”.LCD will show the
picture for one second, then
come to the mode without
memory.
9. Shut Down
After the measurement, press
button “START” to turn off the
machine; the machine will be
automaticallly power off after 1
minute of none use.