2014 light tunnels I F
SUNSHINE HOUSE In order to supply interior with natural light where there are no opportunities to install roof or vertical windows, an effective solution can be a LightTunnel. Thanks to the light tunnel, the natural light gets into the building illuminating its interior. In the other rooms light tunnel can be an additional source of light. The amount of light which enters the room thorough the light tunnels depends on the light intensity outside the building.
The amount of light The same room without windows and with asymmetrical light tunnel placement which can be justified in order to secure better illumination Depending on the user's necessities, colour of walls (possible diffusion and reflection of the light) and furniture placement - this is a basic scheme of The simplified light distribution shown below the light tunnel installed in the middle of the room without windows. of a determined zone ( e.g desk with computer) in the room.
Light tunnel Light tunnel with rigid light transmitting tube with rigid light transmitting tube Light tunnel SRT Plus consists of : dome, 3-element light transmitting tube- SRM-61cm, elbow SRK*, ceiling frame, prismatic diffuser, SLO light kit and installation kit. The total length of elements connected in straight line is 2.1m. SRT PLUS FLASHING Flashing is used for a correct light tunnel installation into the roof slope.
LIGHT TUNNELS’ FLASHINGS Light Tunnel Flashing SLS is suitable for flat roof coverings up to 10 mm (2 layers x 5 mm) thickness e.g. tiles, shingles, slates. SLZ flashing is applied to roof coverings with a profile depth of up to 45 mm such as: tiles, profile metal sheeting. SLH flashing is ideal for fitting light tunnels with profiled roof coverings with a profile depth of up to 90 mm e.g. roof tile, high profile metal sheeting.
LIGHT TUNNEL LIGHT TUNNEL with flexible light transmitting tube with flexible light transmitting tube SLT Plus - light tunnel consists of : dome, light transmitting - 3m long tube, ceiling frame, prismatic diffuser, SLO light kit and installation kit. SLT PLUS FLASHING DOME The dome is made of polymethacrylate, a material resistant to mechanical damage. The dome’s shape and height is a combination of self-cleaning effect and co-efficient of overall sun light transmittance to building interior.
LIGHT TUNNELS’ FLASHINGS Light Tunnel Flashing SLS is suitable for flat roof coverings up to 10 mm (2 layers x 5 mm) thickness e.g. tiles, shingles, slates. SLZ flashing is applied to roof coverings with a profile depth of up to 45 mm such as: tiles, profile metal sheeting. SLH flashing is used for fitting light tunnels with profiled roof coverings with a profile depth of up to 90 mm e.g. roof tile, high profile metal sheeting. SLZ ACCESSORIES FOR LIGHT TUNNELS SLM light transmitting tube extension kit.
FAKRO reserves the right to change specifications at any time. FS/8str/GB/13.01.2014 G04A Fakro GB Ltd Fakro House Astron Business Park Hearthcote Road Swadlincote DE11 9DW Telephone : 01283 554755, Fax : 01283 224545 www. fakro.co.uk, e-mail: sales@fakrogb.