Specification

TECHNICAL
SPECIFICATION
ATTIC LADDER LMP
I. APPLICATION
Folding section loft ladder LMP allows access to the attic space, even in very high
rooms, while maintaining maximum comfort and safety of use. Supported room
height range from 9’10” to 12’.
II. STRUCTURE
No. Element Description
1 Hatch
insulated, sandwich type,
thickness: 1⁄”.
thermal insulation thickness: 1⁄”.
2 Frame
pinewood.
height: 7⁄”
seal: 1x
3 Ladder
metal
ladder width: 15”
stringer height: 3⁄”
Distance between stepss: 9½”.
4 Steps
metal, equipped with anti-slip profile.
step width: 3⁄”
length: 13¼”
5 Standard Accessories
Plastic ends
Handrail with unloading mechanism.
Lightweight aluminum telescopic rod to open the
hatch.
III. DIMENSIONS
No. Rough Opening Room height
1 22,5” x 56,5”
9’10” - 12’2 25” x 56,5”
3 30” x 56,5”
IV. TECHNICAL PARAMETERS
Maximum loading 350 lbs
Heat transfer coefficient R-value: 5.2
V. COMPATIBLE ACCESSORIES
Ladder balustrade LXB-U
The balustrade is available in one standard size
30”x54” for all attic ladders.
Wooden trim LXL-W
The trims are available in size 30”x56,5” for smaller
sizes have to be cut.
PCV trim LXL-PVC
The trims are available in size 30”x56,5” for smaller
sizes have to be cut.
Box extension LXN
The standard box height is 4”. While ordering the
LXN please provide ladder type and size.
Upper hatch LXW The height of the upper hatch box is 7¾“.
Installation brackets LXK Maximum ceiling 15⁄ ”
© FAKRO FAKRO America LLC, 39 Factory Rd. Addison, IL 60101, www.fakrousa.com
5.2
R-value