User Manual
Table Of Contents
- 1. Introduction
- 2. Security
- 3. Safety standards
- 4. Technical data
- 5. FOX3-KMD application interface
- 6. Hardware Interfaces
- 7. Housing
- 8. RF Exposures
FOX3-KMD HARDWARE MANUAL VERSION 1.0.1
4. TECHNICAL DATA
4.1. Product features
Supply voltage range:
➢ Operating power supply voltage range of +10.8 V to +32.0 V.
Operating temperature range:
➢ - 40°C to + 85°C (see chapter 4.1.2 for more details).
Physical characteristics:
➢ Size: 72.0 ± 1.0 mm x 139 ± 1.0 mm x 28.0 ± 1.0 mm
➢ Weight (with battery): ca. 215 gr.
Physical Interfaces:
➢ Main Port (8pin row connector)
➢ Accessory Port (6pin row connector) reserved
➢ Antenna port (FAKRA) - Reserved
➢ NFC1 and NFC2 ports (4pin row connectors)
➢ SIM Chip
➢ Built-in 3D G-sensor for power management, motion and shock alarm
➢ 3 x LED indicators (red, green, blue)
➢ GNNS and GSM/3G antenna connectors (FAKRA)
Air humidity:
➢ 5 % up to 95 % (non-condensing).
Directive:
➢ RoHS compliant (RoHS Directive 2002/95/EC)
Firmware:
➢ Embedded TCP/IP stack, including TCP, IP, SMTP and UDP protocols
➢ Accessible via PFAL commands
➢ Upgradable locally via serial port and remotely over the air (OTA).
Internal memory:
➢ 8 Mbyte FLASH for configuration, data-logging and firmware storage
➢ 8 MByte RAM.
Supported protocols:
➢ NMEA Msg.: GLL, GGA, RMC, VTG, GSV, GSA
FALCOM Msg.: IOP, GSM, AREA, 3DP, BIN
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 10 of 23