User Manual
Table Of Contents
- 1. Introduction
- 2. Security
- 3. Safety standards
- 4. Technical data
- 5. FOX3-KMD application interface
- 6. Hardware Interfaces
- 7. Housing
- 8. RF Exposures
FOX3-KMD HARDWARE MANUAL VERSION 1.0.1
6. HARDWARE INTERFACES
This chapter describes the hardware interfaces:
Interface specifications
Antenna Ports FAKRA connectors for connecting GSM/3G & GNSS antennas.
Main Port The 8pin double-row connector, type: MOLEX-43045-08-MICRO FIT. It provides IN/OUT, power supply
and first serial port (SER0) lines.
NFC Windscreen port The 4pin double-row connector for connecting NFC Windscreen BLE accessory
NFC InCar port The 4pin double-row connector for connecting NFC InCar accessory
Accessory Port Reserved (6pin connector)
Optical LED Indicators 3 x LED indicators, free programmable
Aantenna port Reserverd (FAKRA connector)
Mounting Holes 4 x mounting holes for attaching the device to a suitable location.
Table 4: Interface specifications
Figure 1: Interface specifications of the FOX3-KMD device.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 14 of 23