User Manual
Table Of Contents
- 1 Introduction
- 2 Security
- 3 Safety standards
- 4 Technical data
- 5 MAMBO2 application interface
- 6 RF Exposures
- 7 Statements according to FCC
MAMBO2 HARDWARE MANUAL VERSION 1.0.1
4 TECHNICAL DATA
4.1 Product features
Input voltage:
➢ USB port voltage level: +5.0 V ± 10 % (max. 0,5A).
Battery:
➢ Device is powered by a rechargeable 1300 mAh Li-
Polymer battery.
➢ Default operating time is user-application dependant.
Power saving:
➢ 4 different power-saving modes - programmable with PFAL
commands.
Operating temperature range:
➢ -20 °C to + 60 °C (for more details, see chapter 4.1.2)
Physical characteristics:
➢ Size: 54.0 ± 0.1 mm x 103.0 ± 0.1 mm x 26.0 ± 0.1 mm
➢ Weight: ca. 108 gr.
Physical Interfaces:
➢ OLED color display 128x128
➢ 1 x Mini-USB port for battery charging and data transfer,
➢ 1 x SIM Card interface (for 1.8 and 3 V SIM cards),
➢ 1 x LED indicator (shows battery charging status when the
device is turned off; free-programmable by the software
while the device is running.)
➢ 1 x Micro-SD card reader for a Micro SD-Card.
➢ 2 X Soft keys (Left and right soft key buttons),
➢ 1 x 5-way navigation key,
➢ 1 x Hardware reset button.
Operating Software:
➢ Embedded TCP/IP stack, including TCP, IP and SMTP
protocols. TCP/IP allows SMTP protocol allows the sending
of E-Mail via an internet mail server.
➢ Accessible via PFAL commands,
➢ Upgrade via USB and over the air (GPRS/TCP).
Data access/download:
➢ Direct USB connection e.g. laptop, PC:
✔ Bi-directional serial interface,
✔ 5-wires (VCC, Data-, Data+, NC, GND),
✔ Selectable baud rate (default 57600 bps),
✔ 8 data bits, no parity, 1 stop bit, no flow control.
➢ SMS for two-way communication messages,
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 13 of 23