User Manual
Table Of Contents
- 1 Introduction
- 2 Security
- 3 Safety standards
- 4 Technical data
- 5 MAMBO2 application interface
- 6 RF Exposures
- 7 Statements according to FCC
MAMBO2 HARDWARE MANUAL VERSION 1.0.1
1.2 Audience
This document is intended for system integrators and application developers.
1.3 Circuit concept
The MAMBO2 architecture includes the following major functional components (a
block diagram Fig.1 is available below):
ARCHITECTURE INTEGRATES:
High-performance Quad-Band GSM/GPRS core (operating at 26MHz),
20 parallel channel low-power GPS core (operating at L1 1575.42 MHz and
C/A code 1,023 MHz chip rate),
ARM7TDMI Processor (operating at 25MHz) that controls all functions of the
system,
Internal SIM card reader (1.8/3V SIM cards),
Li-Polymer internal battery
Two-way communication
Internal GSM antenna,
Helix GPS antenna.
OPTIONS TO MAMBO2
3D motion sensor (available in basic version),
Micro-SD-Card reader.
PHYSICAL INTERFACES:
Full color OLED display (128x128)
2 x Soft keys, 1 x Navigation key,
Mini-USB port for battery charging and data transfer.
1 x LED free programmable (in OFF mode indicates battery charging
process)
Figure 1: MAMBO2 block diagram
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 6 of 23