User Manual

SAMBA 55/56 VERSION 1.03
Figure 41: Message of registering and logging onto the GPRS network
 The modem is now connected to the GPRS network. Click OK button.
Connection to the internet is completed, so the user can start by
clicking the installed internet software.
Figure 42: Message of GPRS connection.
 Right-click its icon on the taskbar (if present) or in the Network
Connection folder to check the status of this connection. To
disconnect the connection click the Disconnect Popup menu.
Figure 43: Popup menu of Dial-up connection.
Now the user can start the installed web browser, see section 6.1.2.
7.3 Basis Operation
Followings are examples of some AT-commands. Please refer to the AT
Command manual for a full description.
The AT Command manual is available on the Falcom’s Website
 www.falcom.de/download/
NOTE: Issue
AT+CMEE=1 to have extended error code (+CNE ERROR)
his confidentia
Description AT Commands Modem responce Comments
Network
ii
AT+CREG? CREG=<mode>,1
Modem registered to the network
T l document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 41