User Manual

SAMBA 55/56 VERSION 1.03
available accessories and FCC requirements). While there may be
differences between the SAR levels of various phones and at various
positions, they all meet the government requirement for safe exposure. For
body worn operation, to maintain compliance with FCC RF exposure
guidelines, use only accessories that contain no metallic components and
provide a separation distance of 5mm (0.2 inches) to the body. Use of
other accessories may violate FCC RF exposure guidelines and should be
voided.
Health and Safety Information FCC:
Exposure to Radio Frequency (RF) Signals Your GSM/GPRS-Stick-Phone
is a radio transmitter and receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio frequency (RF) energy set
by the Federal Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The guidelines are based
on the safety standards previously set by both U.S. and international
standards bodies:
This EUT has been shown to be capable of compliance for localized
specific absorption rate (SAR) for uncontrolled environment/general
population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and
had been tested in accordance with the measurement procedures specified
in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. 1528-2003
December 2003).
The standards include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health. The exposure standard
for wireless mobile phones employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg
*
.
7.7 Instructions to OEM
This manual includes specific warnings and cautions in order to ensure that
OEMs are aware of their responsibilities, with regards to RF exposure
compliance, for products into which the modem is integrated. With this
guidance, the OEM will be able to incorporate into their documentation the
necessary operating conditions and warnings.
OEMs need to provide a manual with the “final” product that clearly states
the operating requirements and conditions and that these must be observed
to ensure compliance with current FCC RF exposure requirements / MPE
limits. This will enable the OEM to generate (and provide the end-user with)
the appropriate operating instructions, warnings and cautions, and/or
markings for their product.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 46
*
In the U.S. and Canada, the SAR limit for mobile phones used by the public is
1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give additional protection for the
public and to account for any variations in