RU Series Specification

14
R E T R O F I T R E - L E V E R K I T S
H O W T O O R D E R
How to Order
For correct ordering, and to ensure no delays in shipment of
your order, the following descriptive data must be listed in the
sequence shown. Necessary information can be found in other
parts of this catalog. The example below shows an order for 12
each RW leversets for use in the passage function, D (Dane) trim
design, 626 nish, right hand door.
Quantity: Indicate the quantity required.
Catalog Number: Select catalog number from below.
Trim Design: Indicate letter of lever design.
Example: A=Avalon; D=Dane; Q=Quantum.
Finish: Specify ANSI nish number from below.
Function: Specify current lock function for Retrot.
Door Hand: Specify right hand or left hand.
How to Order Example
Qty. Catalog Number Trim Design Finish Function Handing Other Requirements
12 RW340 D 626 For use on Passage Function RH Prepare for Russwin
Lock Functions Falcon Arrow Baldwin Best
Corbin/
Russwin*
Lockwood Sargent Schlage** Yale** Marks
A. Passage 040 140 110 240 340 440 540 640 740 840
B. Privacy 041 141 111 241 341 441 541 641/645 741/745 841
C. Ofce/Classroom/
Storeroom
042 142 112 242 342/346 442 542 642/646 742/746 842
D. Entry/Dormitory 043 143 113 243 343/347 443 543 643/647 743/747 843
E. Store Door/Public
Restroom/Asylum
044 144 114 244 344/348 444 544 644/648 744/748 844
Catalog Numbers
A. Passage: No cylinder holes—outside or inside
B. Privacy: Emergency hole outside —T-turn inside
C. Ofce/Classroom/Storeroom: Cylinder hole outside
—blank inside
D. Entry/Dormitory: Cylinder hole outside—T-turn inside
E. Store Door/Public Restroom/Asylum: Cylinder hole outside
and inside
Note: Basic numbers for current products are listed. Consult
factory for ordering numbers for older products or non-
standard products.
* Corbin/Russwin 346, 347 and 348 are for 3-5/8” C to C with 1-1/2” master ring cylinder hole.
All other Corbin/Russwin numbers are standard 3-5/8” C to C with standard mortise cylinder hole.
** Schlage K & L Series are for 3-55/64” C to C. K requires extra rotation. K requires 640, 645, 646, 647 and 648.
*** Yale 745, 746, 747 and 748 are for 3-1/2” C to C (old style Yale). All other Yale numbers are for 3-7/8” C to C (current Yale standard).
Trim Finishes Chart
Description ANSI No. Available on
Bright Brass 605 All Trim
Satin Brass 606 *
Satin Bronze 612 *
Satin Bronze Oil Rubbed 613 *
Bright Chrome 625 *
Satin Chrome 626 All Trim
* Consult current price book for nish availability by design.
Ordering Information
1. Need sample lock chassis with spindle(s).
2. Specify center-to-center dimension of hub to cylinder.
3. Specify center-to-center dimension of hub to T-turn.
4. Specify exact spindle size (both inner & outer).