RU Series Specification
R U S E R I E S
L O C K F E AT U R E S A N D B E N E F I T S • LO C K S P E C I F I C AT I O N S
4
Retrot Locks Features and Benets
The RU Series from Falcon is designed to retrot existing unit
locks manufactured by Falcon (Weiser), Corbin Russwin and Yale.
It exceeds ANSI Grade 1 specications and is UL/ULC listed.
Incorporates Falcon’s vandal resistant PressureRelease™ trim to
prevent damage to internal mechanism. Installs with minimal
rework to existing doors while preserving door and frame for cost
effective project planning. Falcon’s RU Series satises all ADA easy
access requirements.
Features Include:
• Vandal resistant PressureRelease™ outside lever disengages
when locked to prevent damage to internal mechanism.
• 3 lever designs.
• Complements Falcon’s ”Family” of lever designs.
• ”Power Spring™” in rose trim prevents lever sag.
• 12 commercial lock functions.
• 6 standard nishes: 605, 606, 612, 613, 625, 626.
• No exposed mounting screws.
• Solid bar stock deadlocking feature prevents latch binding and
lock failure due to poor door alignment.
• Exceeds 800,000 cycle ANSI Grade 1 requirement.
• Meets or exceeds all other ANSI A156.2 rigorous Grade 1
specications for key-in-lever products.
Benets Include:
• Preserves existing facility doors and frames.
• Preserves original architectural design without adapter plate or
add-ons.
• Easy installation with minimal door modications.
• Features a 4” square rose which covers existing mounting
holes, most paint lines and required door rework.
• Complies with ADA easy access requirements.
• UL/ULC listed for 3 Hour A Label doors.
• Strikes available to match existing frame preparation.
• Reuse existing facility cylinders and key system.
• Non-handed chassis and eld reversible trim and latch bolt for
easy stocking and lower inventory cost.
• Key removable outside lever for easy cylinder replacement.
• Outside lever secured by a spring-loaded retainer. Retainer
cannot be depressed when locks have been locked. Inside lever
secured by a set screw. Levers have heavy-duty steel individual
return springs in order to prevent lever sag.
Falcon Lock RU Series Specications
Retrot locksets shall be Falcon Lock RU Series or equal and meet
the following requirements:
• Exceeds ANSI A156.2 Grade1 Key-in-Lever specications.
• Available with Falcon standard or interchangeable core
cylinders in 6 and 7-pin conguration.
• Interchangeable core levers are non-removable with core
installed.
• Available with some 6-pin competitor’s keyways.
• Accepts interchangeable (removable) cores and standard 6-
pin cylinders from the following manufacturers: Arrow, Assa,
Best, Corbin Russwin (except Master-Ring), Medeco, Sargent,
Schlage and Yale.
• PressureRelease™ (clutchable) outside lever.
• Heavy duty, solid levers are 5” long and have no inserts.
• No exposed mounting screws.
• Installs with 10-32 through-bolt screws with thread sealant
for extra security and resistance to vibrating loose.
• Standard lock is for 1-3/4” thick doors.
Also available for 2” and 2-1/4” thick doors.
• 2-3/4” backset only.
• ANSI strike standard.
• Optional OEM strikes available.