Falcon Monarch Dor-O-Matic X Series Heavy Duty, Grade 1 Cylindrical Knob Locks
T H E FA LCO N D I F F E R E N C E S A F E T Y , S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet local building codes, but also your expectations for performance and quality. We take your expectations seriously, and that’s why we build our locks to deliver durability, convenience and unmatched value.
FA LCO N X S E R I E S When you need a tough, reliable lock that can also withstand the corrosive conditions of a marine environment you need a Falcon X Series lock with our XC construction. The XC option provides a stainless steel and non-ferrous constructed chassis that, when paired with stainless steel trim, provides a Grade 1 lock that is resistant to corrosion when exposed to moisture and salt. This full knob line features an interchangeable core that can be removed for quick, easy re-keying.
X SERIES L O C K F E AT U R E S A N D S P E C I F I C AT I O N S Lock Features Door Thickness: 1-3/8” to 1-7/8” doors. Locks for thicker doors also available. Consult factory. Backset: 2-3/4” standard. 2-3/8” also available. Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. XC Series available with all internal parts of stainless steel or other nonferrous materials.
X SERIES KNOB DESIGNS Knobs and Roses Knobs and roses are wrought brass, bronze or stainless steel (Troy) installed over steel or nonferrous reinforcing plates. Knobs are secured by a spring-loaded retainer. Retainer cannot be depressed when locks have been locked.
X SERIES KNOB DESIGNS (CONTINUED) 3-1/4” 2-1/8” 2-11/16” TY Troy-York 3-1/4” 2-3/32” 2-3/4” EY Elite-York Abrasive Coated Knobs Knurled Knobs All trim is available with abrasive coating around the circumference of the knob to identify entrances to hazardous areas to the handicapped. To order, add: “with abrasive coated outer knob” in detail section of order. All heavy duty knobs are available knurled to identify entrances to hazardous areas for the handicapped.
X SERIES FUNCTIONS To order Falcon Lock locksets, please consult page 15 for ordering information and assistance. Indicates interchangeable core available. Catalog Number Description ANSI No. & Grade X101 Passage/Closet Latchset Latch bolt by knobs at all times. F75-1 X301 Privacy Lock Latch bolt by knobs. Outside knob locked by push button in inside knob. Rotating inside knob or closing door releases push button. Emergency release in outside knob. Emergency Release Tool 001423-001-30.
X SERIES CYLINDERS Falcon Interchangeable Cores Catalog Number Description C606 For use in all X Series I/C keyed locks-6-pin (cover style) C607 For use in all X Series I/C keyed locks-7-pin (cover style) CB806 For use in all X Series I/C keyed locks-6-pin (cap style) CB807 For use in all X Series I/C keyed locks-7-pin (cap style) Interchangeable Core Cover Style Interchangeable Core Cap Style ON LC FA ON LC FA Falcon Standard Cylinders Catalog Number 5-Pin Cylinder 6-Pin Cylinder 7-Pin Cyl
X SERIES C O M P E T I T O R K E Y W AY S Standard Cylinders with Competitor Keyways—6-Pin Functions: 561 Functions: 411, 501, 511, 521 and 581 Catalog No.
X SERIES C O M P E T I T O R K E Y W AY S ( C O N T I N U E D ) Standard Cylinders with Competitor Keyways—6-Pin Functions: 561 Hana and X571 Troy & Elite Catalog No.
X SERIES OPTIONS AND ACCESSORIES Latches–Grade 1, UL Listed Square Corner 9/16” Projection Square Corner 3/4” Projection 9/16” Radius Corner 9/16” Projection Latches for X Series locks are UL Listed. 2-3/4” backset standard. 1-1/8” width latch face minimum.Unless otherwise specified, we furnish a 2-1/4” x 1-1/8” x square corner faceplate on 2-3/4” backset latches front standard.
X SERIES OPTIONS AND ACCESSORIES (CONTINUED) Strikes Furnished with a 4 7/8” ANSI Strike unless otherwise specified. 1 ⁄4" 1 1-1/4” 1 " 1 1-1/8” ⁄8 3 ⁄4 " 22-3/4” 1 2-1/8” ⁄8 7 ⁄ 8" 44-7/8” 3 33-3/8” ⁄ 8" 2-3/4” 2 " 4-1/8” 4 ⁄ 8" 1 1-7/8” 1 ⁄ 2" 11-1/2” 2-1/4” 1-5/8” 2-1/8” 2-1/4” 1-5/8” 1-1/2” 9/16” R 5 ⁄16" 11-5/16” 1⁄ " 5 1-5/16” 16 005164-000005164-000 ANSIPrepA115.2 ANSI Prep A115.
X SERIES CONSTRUCTION CORE Construction Keying Falcon offers two different construction key systems depending on the size of and application within the project. Both systems permit the installation and use of regular door locks during construction, yet completely preserve the security of the keying system for the ultimate building owner. The Master, Grand Master and change keys are never with the locks during the construction phase of a building. Only the “construction” keys are sent to the job site.
X SERIES CONVERSION CHART X Series Grade 1 Cylindrical Key-In-Knob Lock ANSI No.
X SERIES G E N E R A L I N F O R M AT I O N How to Order For correct ordering, and to ensure no delays in shipment of your order, the following descriptive data must be listed in the sequence shown. Necessary information can be found in other parts of this catalog. The example below shows an order for 20 each X locksets in the 301 Privacy function, EG (Elite-Gala) trim design in a 626 (satin chrome) finish, with 2-3/4” backset latch, to accommodate doors 1-3/4” thick.
Ingersoll Rand’s Security Technologies Sector is a leading global provider of products and services that make environments safe, secure and productive. The sector’s market-leading products include electronic and biometric access-control systems; time-and-attendance and personnel scheduling systems; mechanical locks; portable security; door closers, exit devices, architectural hardware, and steel doors and frames; and other technologies and services for global security markets. 800-266-4456 www.falcon.
