X Series Specification
11
Square Corner
9/16” Projection
Square Corner
3/4” Projection
9/16” Radius Corner
9/16” Projection
Latches–Grade 1, UL Listed
Latches for X Series locks are UL Listed. 2-3/4” backset standard.
1-1/8” width latch face minimum.Unless otherwise specied, we furnish a 2-1/4” x 1-1/8” x
square corner faceplate on 2-3/4” backset latches front standard.
Catalog
Number
Description Faceplate Size Corner Projection
A98535-000 2-3/4” Backset Spring 2-1/4” x 1-1/8” Square 9/16”
A98535-00D 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Square 9/16”
A98538-000 2-3/4” Backset Spring 2-1/4” x 1-1/8” Radius 9/16” 9/16”
A98538-00D 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Radius 9/16” 9/16”
A98835-0SD 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Square 3/4”
A98838-0SD 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Radius 9/16” 3/4”
Square Corner
1/2” Projection
1/4” Radius Corner
1/2” Projection
Latches–Grade 2, UL Listed For Flat or Beveled Doors
Latches for X Series locks are UL Listed.
These grade 2 latches have self-adjusting fronts to accommodate beveled or at front doors.
Unless otherwise specied, we furnish a 2-1/4” x 1” x square corner faceplate on these latches.
Catalog
Number
Description Faceplate Size Corner Projection
A92320-000 2-3/8” Backset Spring 2-1/4” x 1” Square 1/2”
A92320-00D 2-3/8” Backset Deadlocking 2-1/4” x 1” Square 1/2”
A92321-000 2-3/8” Backset Spring 2-1/4” x 1” Radius 1/2”
A92321-00D 2-3/8” Backset Deadlocking 2-1/4” x 1” Radius 1/2”
A92330-000 2-3/4” Backset Spring 2-1/4” x 1” Square 1/2”
A92330-00D 2-3/4” Backset Deadlocking 2-1/4” x 1” Square 1/2”
A92331-000 2-3/4” Backset Spring 2-1/4” x 1” Radius 1/2”
A92331-00D 2-3/4” Backset Deadlocking 2-1/4” x 1” Radius 1/2”
Note: Specify nish 606, 612, 613, 630
Note: Specify nish 606, 612, 613, 630
R
3 Hour
R
3 Hour
Square Corner
1
/
4" Radius Corner
X S E R I E S
O P T I O N S A N D A C C E S S O R I E S