Falcon Monarch Dor-O-Matic Cylinders, Keys and Keying Systems
T H E FA LCO N D I F F E R E N C E S A F E T Y , S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet local building codes, but also your expectations for performance and quality. We take your expectations seriously, and that’s why we build our locks to deliver durability, convenience and unmatched value.
CYLINDERS, KEYS AND KEYING SYSTEMS Keys and key control are integral parts of maintaining building security, whether it’s during construction or changes in occupancy or use. Falcon offers some of the most versatile and easy to use cylinders and keying systems in the industry. Our interchangeable cores can be removed for quick, easy re-keying and are compatible with SFIC products from other manufacturers. Our multi-level master key program ensures safe, accurate key control.
KEYING SYSTEMS KEY AND CYLINDER MARKING Key and Cylinder Marking For example, the symbol AA1 shown in the illustration identifies the lock to be operated by grand master key A, master key AA and change key AA1. Upon written authorization from the building owner to an authorized Falcon distributor, a bitting list can be furnished for each job to translate the symbols into key bittings. If a key is lost, a replacement key can be ordered by number from the Falcon distributor.
KEYING SYSTEMS H O W TO S P E C I F Y M A ST E R K E Y I N G AA 2- and 3-Level Master Keying Systems To Specify a Simple Master Key System (2 Levels of Keying) The master key symbol consists of TWO letters, such as AA. The change key numbers are added to the master key letters. The numbers come FIRST: 1AA, 2AA, 3AA, etc. When locks are required which are not operated by the master key or other change keys in the system, they are referred to as “single keyed” and given symbols SKD1, SKD2, etc.
KEYING SYSTEMS H O W TO S P E C I F Y M A ST E R K E Y I N G 4-Level Master Keying Systems To Specify a Great Grand Master Key System (4 Levels of Keying) The great grand master key is assigned the symbol GGM. The rest of the symbols are the same as those in 3-level systems: The GMKs are assigned single letters, e.g. A, B, C, D, etc. Caution: Never use X for a grand master key due to the confusion which will result with cross keying symbols presented an the next page.
KEYING SYSTEMS H O W TO S P E C I F Y M A ST E R K E Y I N G Cross Keying Convenience May Reduce Cylinder Security and Hinder System Expansion Whenever two or more different keys such as AA1 and AA2 are both required to operate the same cylinder, the cylinder’s security is reduced. This is called cross keying. When the cross keying occurs under all the same higher level keys, such as AAI and AA2, it is known as controlled cross keying.
KEYING SYSTEMS K E Y W AY S A N D C O N S T R U C T I O N K E Y I N G Keyways “G” keyway is standard for all Falcon conventional (non-I/C) cylinders and will be supplied unless otherwise specified. The multiple keyway structure shown to the right is used to expand keying systems which require more than one keyway. Falcon bored locksets are also available with the most common competitors’ keyways shown below. Falcon does not offer master keying of their keyways.
S TA N D A R D C Y L I N D E R S CO N V E N T I O N A L A N D AU X I L I A RY C Y L I N D E R S Key-in-Knob and Lever Cylinders Auxiliary Lock Cylinders Regular Function Knobs and Levers Lockset Pins Cylinder Deadlock Lazy Tailpieces Lockset Pins Cylinder B all other functions 5-pin A23155-02 D411, 421, 811, 821 5-pin A14889-03 B all other functions 6-pin A23165-02 D411, 421, 811, 821 6-pin A14921-03 B611 5-pin A23151-06 D411, 421 7-pin A14943-03 B611 6-pin A23161-06 D431, 831
S TA N D A R D C Y L I N D E R S C O M P E T I T O R K E Y W AY S T381 Inside T571 10 T Series Cylinders T Series (continued) Cylinders Corbin 60 O-bitted A23167-011 Corbin 60 O-bitted A23167-000 Corbin 60 KD A23167-11D Corbin 60 KD A23167-0KD Corbin Russwin L4 O-bitted A23174-011 Corbin Russwin L4 O-bitted A23174-000 Corbin Russwin L4 KA4 A23174-11A Russwin D1 O-bitted A23168-000 Russwin D1 O-bitted A23168-011 Russwin D1 KD A23168-0KD Russwin D1 KD A23168-11D Sargent LA O-bitt
411, 501, 511, 521, 581 Elite and Troy X Series (continued) Cylinders Corbin 60 O-bitted A23167-005 Corbin 60 KD A23167-5KD Corbin Russwin L4 O-bitted A23174-005 Russwin D1 O-bitted A23168-005 Russwin D1 KD A23168-5KD Sargent LA O-bitted A23166-005 Sargent LA KD A23166-5KD Schlage C O-bitted A23160-005 Schlage C KA4 A23160-5KA Schlage C KD A23160-5KD Schlage E O-bitted A23159-005 Yale 8 Para O-bitted A23169-005 Yale 8 Para KD A23169-5KD X411, 501, 511, 521, 581 Hana X571 Elite
S TA N D A R D C Y L I N D E R S C O M P E T I T O R K E Y W AY S ( C O N T I N U E D ) B611 B Series All other functions B Series Cylinders Corbin 60 O-bitted A23167-011 Corbin 60 KD A23167-11D Corbin Russwin L4 O-bitted A23174-011 Russwin D1 O-bitted A23168-011 Russwin D1 KD A23168-11D Sargent LA O-bitted A23166-011 Sargent LA KD A23166-11D Schlage C O-bitted A23160-011 Schlage C KA4 A23160-11A Schlage C KD A23160-11D Schlage E O-bitted A23159-011 Yale 8 Para O-bitted A23169-0
Y Series All Functions and Designs Y Series Corbin 60 O-bitted Corbin 60 KD Corbin Russwin L4 O-bitted Russwin D1 O-bitted Russwin D1 KD Sargent LA O-bitted Sargent LA KD Schlage C O-bitted Schlage C KA4 Schlage C KD Schlage E O-bitted Yale 8 Para O-bitted Yale 8 Para KD Cylinders A23167-008 A23167-8KD A23174-008 A23168-008 A23168-8KD A23166-008 A23166-8KD A23160-008 A23160-8KA A23160-8KD A23159-008 A23169-008 A23169-8KD H 511 All Knobs H Series Deadbolt D411, 421, 811, 821 D431, 831 D441, 841 D Ser
S TA N D A R D C Y L I N D E R S KEY BLANKS AND KEYS Length Cat. No. 5-Pin KB573* 6-Pin KB577* 7-Pin KB581* Length Cat. No. 5-Pin KB751* 6-Pin KB761* 7-Pin KB771* emergency key for hotel function locksets Length Cat. No. 6-Pin 7-Pin KB579* KB583* 6-pin large bow KB592* Length Cat. No. 5-Pin 6-Pin KB544* KB590* Access Bow 2” access bow is made of blue plastic and meets requirements of Title 24 of the California Code for Handicapped.
S TA N D A R D C Y L I N D E R S TA I L P I E C E S KIT E C E I P TA I L A30730-001-00 for 6-pin T Series except T571 A30730-002-00 for 7-pin T Series except T571 and for 6-pin T571 A30730-006-00 for 7-pin T571 Kit 1389 Contains cap tool and most parts on this page, except hotel function and 7-pin tailpieces A30730-003-00 for 6-pin T381 inside and B611 A30730-004-00 7-pin T381 inside A30480-004-00 for Y and B Series, except B611 A12053-000-00 Retainer for all 22164 and 22169 tailpieces A30034-001-00 f
S TA N D A R D C Y L I N D E R S ACCESSORIES Service Equipment and Supplies Pin Kits 1418 1417 Standard (includes key gauge, follower and cylinder cap tool) Restricted Keyways (includes key gauge, follower and cylinder cap tool) T PIN KI Kit Refills: Pins and Springs A08553-00-00 A08580-00-00 A08552-000-00 A08554-000-00 Bottom pins for standard keyways, *sizes 0 thru 9, 100-pack Master pins for standard keyways, *sizes 2 thru 9, 100-pack Top pins, 100-pack Tumbler springs, 100-pack Miscellaneous Cylin
INTERCHANGABLE CORE OVERVIEW Interchangeable Core Advantages Interchangeable core (I/C) offers maximum flexibility to the building owner. Whenever a key is lost or stolen, locks can be rekeyed quickly by non-locksmith personnel. All it takes is the special CONTROL key. This key is used to remove and install all cores in the system. Just go to the door, remove the old core and install the new one with the control key.
INTERCHANGABLE CORE OVERVIEW (CONTINUED) Cores Description: Uncombinated cores are supplied without pins, springs or keys. May be keyed into A2, A3 and A4 Systems in the field. Combinated cores are keyed and ready to install. They are furnished with two change keys each. A2 System standard, A4 special. See page 20 for details. Packaging: Uncombinated cores are packed 20 per box. Interchangeable Core Available with Falcon style spring cover (shown) or Best® style individual pin chamber caps.
INTERCHANGABLE CORE KEY BLANKS AND KEYS Key Blanks and Keys Key Blanks (suffix key section) Standard Plain Both Sides (non-embossed) Description Standard Plain Both Sides Standard KB628* KB718* Best Style KB800 KB801 Stamped CONTROL KB608* KB744* M Series EMERGENCY KB737* KB748* Best Style M Series EMERGENCY KB804 KB805 Blade for 2” access bow KB633* n/a Plastic access bow only 001911-001-70 n/a Cut Key (suffix keyway) Description Standard 6-Pin Best Key Bow Access Bow 2” acce
INTERCHANGABLE CORE TA I L P I E C E S A N D C O N S T R U C T I O N K E Y I N G Cylindrical Lock Tailpieces Throw members shown actual size. B, RU, T and X Series 1 2 3 4 5 6 7 Ref. Length Part number Application 1 1.40” 022175-000-30 X Series, except X571 2 1.53” 030739-003-30 RU, T381 inside only, 7-pin, B611 3 1.69” 030739-002-30 RU, T381 inside only, 6-pin, B611 4 2.22” 030739-005-30 RU, T571 7-pin 5 2.37” 030739-004-30 RU, T571 6-pin 6 2.
INTERCHANGABLE CORE ACCESSORIES Key Bitting Punch Stamping Fixture 1208 1398 A2 System Holds one key and one core for face or side marking Key Gauge Pin Kit 012612-000-60 A2 System 030425-000-60 A4 System 1404 1391 1403 1390 A2 System, Falcon spring cover cores (standard) A2 System, Best® style capping A4 System, Falcon spring cover cores A4 System, Best® style capping Depth Bars for Key Machine 031033-000-30 A3 System 031034-000-30 A4 System Capping Pin and Ejector Pin 1392 1405 Capping pin,
MORTISE CYLINDERS M O RT I S E , R I M A N D C A M LO C K C Y L I N E R S Mortise, Rim and Cam Lock for Standard Cylinders Note: Specify finish: 605, 606, 612, 613, 626, 629, 630 Mortise Cylinder 900 Series cylinders are furnished with #4 straight cam and 250 Series with #1 cloverleaf cam unless otherwise specified. See table for product numbers. See pages 24-25 for optional cams and 26-27 for collars.
MORTISE CYLINDERS M O RT I S E , R I M A N D C A M LO C K H O U S I N G Mortise, Rim and Cam Lock for Standard Cylinders Note: Specify finishes: 605, 606, 612, 613, 626, 629, 630 Note: Specify finishes: 605, 606, 612, 613, 626, 629, 630 Mortise Cylinder Housing Standard housings furnished with #5 straight cam and hotel function housings furnished with #10 cloverleaf cam. See table for product numbers. See pages 24-25 for optional cams and pages 26-27 for collars.
MORTISE CYLINDERS CAMS Each part number indicates a package of 10 cams Falcon 1, 2, 3 10 4 5 14 15 Monarch 5 24 21, 22, 23 20 Schlage 13 24 12 Lock Reference Number Part Number For Cylinder Falcon M Series deadbolt functions 1 2 3 10 A09894-001-00 A09894-002-00 A09894-003-00 A12667-007-00 Falcon, Ilco, Lori, Schlage Arrow, Sargent & Yale Corbin Russwin Falcon I/C Falcon M Series non-deadbolt functions. Most old black cast iron locks.
Each part number indicates a package of 10 cams Other Manufacturers Reference Number Part Number For Cylinder Adams Rite MS, 4500 and 4700 Series 6 8 A09899-000-00 A12667-001-00* Conventional I/C Adams Rite 4070 deadlock 16 9 A09898-000-00 A12667-002-00 Conventional I/C Arrow, Corbin Russwin ML2200 except ML2255 and ML2242 inside 11 A20069-000-00 A12667-011-00 Conventional I/C Lock Reference Number Part Number For Cylinder Corbin Russwin DL4000 Series 27 A12677-013-00 I/C Corbin Russ
MORTISE CYLINDERS CYLINDER COLLARS Standard Collars for Cylinders Ordered Separately Length Cylinder Non-AR Cams AR Cam 1” 984D A08794-000 — 1-1/8” 250, 965, 966, 973, 974, 985 Series A08794-000 008876-002 1-1/4” 251, 986 Series A08794-001 008876-003 1-3/8” 252, 253, 987, C987, C997 A08794-002 008876-004 Longer C260 Series, (C)988, (C)990, (C)992 A08794-000 008876-000 Escutcheon Trim Ring Door Thickness Function 985 1-1/8” 986 1-1/4” (C)987 1-3/8” (C)988 1-1/2” 1-1/2” Single
Rim Cylinder Tailpieces A B A B A Dim. A Dim. B Part No. 3/32” 7/32” 11/32” 15/32” 43/64” 9/32” 13/32” 17/32” 21/32” 55/64” A08790-000 A08790-001 A08790-002 A08790-003 A08790-004 3/32” 7/32” 11/32” 15/32” 9/32” 13/32” 17/32” 21/32” A08794-000 A08794-001 A08794-002 A08794-003 1/8” 3/16” 1/4” 3/8” 1/2” 5/8” — — — — — — 008876-000 008876-005 008876-001 008876-002 008876-003 008876-004 Wave washer included.
Ingersoll Rand’s Security Technologies Sector is a leading global provider of products and services that make environments safe, secure and productive. The sector’s market-leading products include electronic and biometric access-control systems; time-and-attendance and personnel scheduling systems; mechanical locks; portable security; door closers, exit devices, architectural hardware, and steel doors and frames; and other technologies and services for global security markets. 800-266-4456 www.falcon.
