Installation and Operation Guide

ManualsBrandsFalcon ManualsAll Stoves110cm Freestanding Dual Fuel Oven/Stove

ArtNo.302-0002 - 6BC annotated

ABCDEF

ArtNo.302-0001 - 6-button clock

The Clock

You can use the timer to turn the left-hand multi-function

oven on and o. The clock must be set to the time of day

before the ovens will work.

Setting the Time of Day

The 6-button LCD clock is shown in Fig.2-28. When the

clock is rst connected the display ashes ( 0.00 ) and (G)

alternately.

Press and hold both the [C] and [D] buttons down

(Fig.2-29). Now press the [+] button (or the [–] button) until

the correct time shows.

Do not forget that it is a 24-hour clock.

If you need to reset the cooker, turn o the power supply and

wait for a couple of minutes and start again.

Setting the Minute Minder

Press and hold the [C] button (Fig.2-30), and then press the

[+] button until the length of time you want to cook for is

shown (Fig.2-31).

You can check the time remaining by pressing [C]. When the

beeper sounds cancel it by pressing [C].

• The ‘cook period’, which is the length of time you

want the oven to cook for.

• The ‘stop time’, which is the time of day you want the

oven to stop cooking.

To Stop the Oven Automatically

Press and hold the ‘stop time’ [E] button (Fig.2-32) and then

press the [+] button (or [–] button) until the required ‘stop

time’ shows (Fig.2-33). AUTO will show in the display.

Once the ‘stop time’ is reached, the beeper sounds. To stop the

beep turn the oven control knob to 0 rst and then press [

]

once; press [

] again to return to manual cooking.

To Start and Stop the Oven Automatically

Before you set the clock you must have two numbers clearly

in mind – the ‘cook period’ and the ‘stop time’.

Note: You cannot set a start time directly – this is set

automatically by setting the ‘cook period’ and the ‘stop time’.

Press and hold the [D] button (Fig.2-34) and then press the

[+] button (or [–] button) until the required ‘cook period’ shows

(Fig.2-35).

Now press and hold the [E] button (Fig.2-36) and then press

the [+] button (or [–] button) until the required ‘stop time’

shows (Fig.2-37). Release the buttons.

AUTO will now show in the display.

Set the oven to the required temperature. When cooking is

nished the beeper will sound. Turn the oven knob to the OFF

position rst, and then press the [

] button once to stop the

beep; press it again to return to manual cooking.

If you are out, do not worry about the beeper going o, it

stops after a while. When you return, turn the oven knob to 0

rst, and then press [

] twice to return to manual cooking.

ArtNo.302-0004 -

Minute minder setting 2

Fig.2-28

ArtNo.302-0005 -

6BC Stopping the oven 1

Fig.2-29

ArtNo.302-0003 - 6BC

minute minder setting 1

Fig.2-30 Fig.2-31

Fig.2-32

Fig.2-35

Fig.2-36 Fig.2-37

A – Minute minder, B – ‘Cook’ time, C – ‘Stop’ time,

D – Manual, E & F – Time setting buttons

ArtNo.302-0005a -

6BC Stopping the oven 1a

ArtNo.302-0006 - 6BC

setting the cook time