Installation and Operation Guide

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas supplies before servicing. Check appliance is safe when you have nished.
35
Art No 215-0028 - Handrail fascia fixings
ArtNo.210-0009 - Classic
removing the handles
9. Servicing

BEFORE SERVICING ANY GAS CARRYING
COMPONENTS TURN OFF THE GAS SUPPLY

Check the appliance is gas sound after completion
of service. When checking for gas leaks DO NOT use
washing up liquid – this can corrode. Use a product
specically manufactured for leak detection.

DO NOT use reconditioned or unauthorised gas
controls.

Disconnect from the electricity supply before
servicing, particularly before removing any of the
following: control panel, side panels, hotplate tray
or any electrical components or covers.

Before electrical reconnection, check that the
appliance is electrically safe.
1 Panels & Handrails
1.1 To Remove the Handrail
Remove the plastic blanking plugs (Fig.9-1) and remove
the 2 end bracket xing screws.
1.2 To Remove the Control Panel
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control knobs. Remove the handrail (see
1.1).
Now remove the 2 cross-headed screws hidden behind
the handrail end brackets (Fig.9-2).
Pull o all the control knobs and remove the xing
screws underneath the control panel.
Lift the control panel and pull forwards, taking care not
to damage or strain the wiring.
1.3 To Remove a Side Panel
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel (see 1.2). Pull the cooker
forward. Remove the 4 retaining screws from each
panel (2 at the front and 2 at the rear). The lower front
retaining screws (one each side) are situated beneath
the lower edge at the front corners of the side panels
Reassemble in reverse order.
Fig.9-2
Fig.9-1