User's Manual
Table Of Contents
- U111289 cover - Falcon
- U111289-01 [AUS]
- 1. Before You Start...
- 2. Cooker Overview
- 3. Using the Glide-out Grill™
- 4. 6 Button clock
- 5. Cooking tips
- 6. Cooking Table
- 7. Cleaning your cooker
- 8. Troubleshooting
- 9. Service and Spares
- 10. Installation
- Safety Requirements and Regulations
- Provision of Ventilation
- Location of Cooker
- Conversion
- Positioning the Cooker
- Moving the Cooker
- Lowering the Two Rear Rollers
- Completing the Move
- Levelling
- Fitting the Stability Bracket and Chain
- Fitting the Stability Bracket
- Fitting the Restraining Chain
- Repositioning the Cooker Following Connection
- Gas Connection
- Natural Gas
- Propane
- Pressure Testing
- Electrical Connection
- Fixed Wiring
- Final Fitting and Checks
- Customer Care
- 11. Conversion to LP Gas
- 12. Servicing
- 13. Circuit Diagram
- 14. Technical Data
- Blank Page
- Blank Page
- Blank Page
- Blank Page
- Blank Page
- Blank Page
12
Operating the Ovens
Fan Oven
Turn the oven knob to the desired temperature (Fig. 2.16).
The oven indicator light will glow until the oven has reached
the temperature selected. It will then cycle on and o during
cooking.
Multi-function Oven
The multi-function oven has two controls: a function selector
and a temperature setting knob (Fig. 2.17).
Turn the function selector control to a cooking function. Turn
the oven temperature knob to the temperature required (Fig.
2.16).
The oven heating light will glow until the oven has reached
the temperature you selected. It will then cycle on and o
during cooking.
ArtNo.235-0004 -
Classic DL oven 1
Fig. 2.16
ArtNo.235-0003 - Classic DL MF knobs
Temperature
Function
Fig. 2.17