User's Manual

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas supplies before servicing. Check appliance is safe when you have nished.
41
5.3 To Remove an Oven Inner Back
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Main Oven
Open the main oven door. Remove the 4 screws and washers
securing the inner back to the back of the oven (Fig. 12.5).
Carefully lift away the inner back.
Reassemble in reverse order, making sure that you fully
tighten the 4 screws and washers.
Tall Oven
Open the tall oven door and remove the 2 screws and
washers securing the inner back to the back of the oven.
Carefully lift away the inner back.
Reassemble in reverse order.
Check the door for correct operation.
5.4 To Remove the Fan Oven Element
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the oven inner back (see 5.3). Remove the 2 screws
from the top of the element and the one from the bottom of
the element inside the oven (Fig. 12.7).
Lift the element out carefully, disconnecting the terminals
connected to the element (noting their positions).
If it is not possible to disconnect the leads in this way, pull the
cooker forward to gain access to the rear.
Remove the screws securing the electric cover to the back
sheet, remove the cover and disconnect the terminals from
the rear.
5.5 To Replace an Oven Fan
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forward to gain access to the rear. Remove
the screws securing the electric cover to the back sheet and
remove the cover.
Disconnect the 3 terminals connected to the fan noting their
position. Remove the oven inner back (see 5.3). Hold the fan
blade and remove the centre nut (left-hand thread) 2 brass
washers, fan blade and circlip. Unscrew the fan retaining nuts
and washers (3 o each) and lift the fan away from the rear of
the cooker.
Fit the new fan and reassemble in reverse order. Check the
operation of the oven.
Element xing screws
ArtNo.321-0005 Fan oven element
Fig. 12.7