User Manual
Table Of Contents
- 1. Before You Start...
- 2. Cooker Overview
- 3. Using the Glide-out Grill™
- 4. Cooking tips
- 5. Cooking Table
- 6. Cleaning your cooker
- 7. Troubleshooting
- 8. Service and Spares
- 9. Installation
- Location of cooker
- Conversion
- Positioning the Range
- Moving the cooker
- Lowering the two rear rollers
- Completing the move
- Levelling
- Repositioning the cooker following connection
- Gas Connection
- Natural Gas
- Propane
- Pressure Testing
- Pressure Testing
- Electrical Connection
- Connection in New Zealand
- Fixed Wiring
- Repositioning the cooker following connection
- 10. Final Fitting
- 11. Conversion to LP Gas
- 12. Servicing
- 13. Circuit Diagram
- 14. Technical Data
32
INSTALLATION
Check the appliance is electrically safe when you have nished.
Repositioning the cooker following
connection
If you need to move the cooker once it has been connected
then you need to unplug it and, having gripped under the
fascia panel and lifted the front of the cooker slightly
(Fig. 9.6), you need to check behind the cooker to make sure
that the electricity cable is not caught.
As you progress, make sure that the electricity cable always
has sucient slack to allow the cooker to move.
When you replace the cooker, again check behind to make
sure that the electricity cable is not caught or trapped.